2019 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2019
XC90 (16-) 2019

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314148001.332204780, 32204779, 39842099, 31414795, 31414796, 39842098, 31659529, 31659530
Steering wheel leather heated




Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46

 

981 4089 Anti-static strap

Tool number:981 4089

Tool description:Anti-static strap

Tool boards:39

 

981 4199 Torque wrench

Tool number:981 4199

Tool description:Torque wrench

Tool boards:08


Equipment
IMG-345497
IMG-239664

IMG-433181


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-394535
 
4
IMG-387004
 

Release the lock.

Remove the panel.

5
IMG-394520
 

Remove the battery's negative cable.

6
 

When removing on right-hand drive cars, perform the procedures on the opposite side and/or mirrored.

7
IMG-395203
 
8
IMG-395231
 

Release the lock.

9
IMG-395232
 
10
IMG-395236
 

Release the lock.

11
IMG-395252
 
12
IMG-395250
 

Release the locks.

13
IMG-395260
 

Remove the panel.

14
IMG-395262
 

Remove the screws.

Remove the panel.

15
IMG-395203
 
16
IMG-395375
 

Release the lock.

17
IMG-395232
 
18
IMG-395391
 

Release the lock.

19
IMG-395397
 

Warning!
When temporarily storing a pyrotechnical component, it must always be positioned with its active part (e.g. air bag front or equivalent) facing up.

Remove the marked part.

The part is to be reused.

20
IMG-395457
 

Disconnect the connector.

21
IMG-395470
 

Disconnect the connector.

22
IMG-395471
 

Remove the screw.

Remove the marked part.

23
IMG-433271
 

Remove the screws.

24
IMG-433240
 

Note!
The graphic shows the back of the component before removal.

Disconnect the connectors.

Remove the cable harness clips.

25
IMG-433426
 
  1. Tilt the component somewhat.

  2. Release the catch.

  3. Remove the marked part.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

 

Accessory installation

26
IMG-433229
 


Use special tool: T9814089, Anti-static strap

27
IMG-433430
 

Caution!
Take extra care when handling the component.

Install component that comes with the accessory kit.

28
IMG-433240
 

Reinstall the removed parts in reverse order.

29
IMG-433271
 


Tightening torque: Steering wheel module, to Steering column , 2.8 Nm


Use special tool: T9814199, Torque wrench

 

Installation

30
IMG-433671
 

Reinstall the removed part.

31
IMG-433665
 

Reinstall the removed part.

Reinstall the screws.

32
IMG-433661
 

Reinstall the removed part.

 

Removal

33
IMG-395670
 

Use: Interior trim remover

34
IMG-395671
 

Use: Interior trim remover

35
IMG-395681
 

Use: Interior trim remover

36
IMG-395682
 

Use: Interior trim remover

37
IMG-395680
 

Remove the marked part.

38
IMG-395701
 

Remove the marked part.

Repeat on the other side.

The part is to be reused.

 

Accessory installation

39
IMG-433690
 

Repeated on the right-hand side.

Reuse existing parts.

40
IMG-395806
 

Repeated on the right-hand side.

41
IMG-395811
 

Note!
Only use moderate force.

42
IMG-395820
 

Position/route the cable harness as illustrated.

43
IMG-395825
 

Position/route the cable harness as illustrated.

44
IMG-395945
 

Install the marked component.

45
IMG-447575
 

Install component that comes with the accessory kit.

Tighten the screw.


Tightening torque: Steering wheel to steering column (center screw) , 60 Nm

46
IMG-395968
 

Connect the connectors.

47
IMG-396035
 

Connect the connector.

48
IMG-396040
 

Reuse existing parts.

Press until a click is heard.

 

Installation

49
IMG-394580
 

Reinstall the battery's negative cable.


Tightening torque: Battery cable for battery , 6 Nm

50
IMG-394531
 

Warning!
The first time the vehicle is activated after the battery has been disconnected, this must be performed from the rear seat, avoid the work area for the air bags.

51
 

Reinstall the removed parts in reverse order.

 

Accessory installation

52
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31428189