2013 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2013
V60 (-18) 2013

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322042531.032204251
Sill molding, illuminated, front




IMG-381450




Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-239667

IMG-381484

IMG-434515


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Preparation

3
IMG-400004
 

When installing, the car must retain a temperature of 20 degrees C.

 

Removal

4
IMG-381451
 

Use: Interior trim remover

5
IMG-381452
 

Use: 1161721, Isopropanol

Clean the surface.

Wipe dry.

 

Accessory installation

6
IMG-434520
 

Remove the protective film.

Install component that comes with the accessory kit.

7
IMG-389806
 

Use appropriate tape to mark the position.

8
IMG-384905
 

Remove the protective film.

9
IMG-381455
 
10
IMG-381486
 
11
IMG-381491
 
12
IMG-435231
 

Install component that comes with the accessory kit.

13
IMG-389626
 

Note!
Apply pressure only where the tape is located.


Note!
Maintain a constant pressure above each piece of tape for the time specified in the image.


Note!
Ensure that the tape is fixed to the surface.

14
IMG-381490
 

Use: 1161721, Isopropanol

Clean the surface.

Wipe dry.

15
IMG-381488
 

Install component that comes with the accessory kit.

16
 

Repeat all method steps for the other side.

17
 

Warning!
Check for correct operation after the installation.