Excl. JP, PT
Op. No.: 89147
A very compact bicycle holder in a first-class design for two bicycles that is easy to handle and store. The bicycle holder is prepared for a towbar equipped with "Fix4Bike". The advantage with "Fix4Bike" is that the bicycle holder has a better fitting and is easier to fit onto the tow bar.
With a simple two-step system, the holder can be installed on the towbar within seconds; it folds out and is then ready to be used. It gives you the freedom to take your bicycle on both long and short journeys. When the bicycle holder is not in use, it is easy to store either in your car or in your home. The bicycle holder is tested and certified to meet the highest quality and safety standards.
The bicycle holder is suitable for several types of bicycles, large and small. As the bicycle holder can hold up to 60 kg load capacity, it is possible to transport mountain bikes and electric bicycles.
Aluminium and other light durable materials have been used in this high quality holder.
The towbar coupling is simple to remove using an ergonomic handle.
The bicycles are held in place with unique, removable and lockable frame holders. The frame holders are rubber covered for maximum grip and to protect the bicycle frames. The wheel holders have adjustable pump tension for simple securing of the wheels, including fat bike wheels.
The bicycle holder has a simple foot operated tilt function, which means the cargo area is easily accessible even when the bicycles are fitted. Foot operation leaves both hands free to support the bicycles when the bicycle holder is tilted.
The holder has a double lock function, which means that the holder is locked into place at the towbar and the bicycles are locked at the holder.
The low height makes it easy to load the bikes, but to simplify loading further, a removable ramp can be supplemented.
|32296439||LHD, Incl. 13-pin wiring|
Facts and advantages
The advantage with "Fix4Bike" is that the bicycle holder has a better fitting and is easier to fit onto the tow bar.
Fully folded in only two stages.
Modern design with durable and light materials.
Lamps with "light guide" technology.
Pump binding for the wheels makes attachment easy.
Simple to remove using an ergonomic handle.
Detachable and movable frame holder.
Foot operated tilt function, for easy access to the luggage compartment, even with the bicycles loaded.
Folds away for easy storage.
Lockable, bicycle to bicycle holder and bicycle holder to towbar.
Suitable for most bicycles and wheel sizes.
Suitable for bicycles with 22-80 mm diameter frames.
Suitable for bicycles with a long wheel base, for example "downhill MTB´s".
Suitable for bicycles of all wheel widths.
Highest load capacity - 2 x 30 kg (e-bike).
Distance between bicycles - 22 cm (e-bike).
Can be supplemented with a detachable ramp to facilitate loading. There is also the option to store the ramp inside the bicycle holder.
Lock kit "One Key System" can be installed if the same key is required for the load carrier and bicycle holder, see Lock kit
18 kg (40 lbs)
Width: 310 mm
Depth: 630 mm
Height: 680 mm
Width: 1230 mm
Depth: 630 mm
Height: 680 mm
2 bicycles, Max 60 kg
Max. weight per bicycle is 30 kg
TÜV, City Crash, XP R18-904-4
Available June 2021.
Only suitable for towbar equipped with "Fix4Bike". (See illustration 2.)