Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2009
XC60 (-17) 2009

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314392191.031435603, 9452379, 31260562
Electrical socket, load compartment




IMG-391176




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46


Equipment
A0000162
IMG-239660
IMG-282889
IMG-239664

IMG-390556


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-377298
 
5
IMG-377299
 
6
IMG-377300
 
7
IMG-377302
 
8
IMG-377309
 

Remove the screw.

9
IMG-377320
 
10
IMG-343420
 

Remove the panel.

11
IMG-377345
 

Detach the panel.

12
IMG-377347
 

Release the catches.

Remove the panel.

13
IMG-346921
 
14
IMG-307608
 
15
IMG-307609
 


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

16
IMG-377342
 

Remove the screws.


Tightening torque: M8 , 24 Nm

17
IMG-346861
 

Remove the screws.

Remove the panel.

18
IMG-377350
 

Detach the panel.

19
IMG-377352
 

Remove the panel.

20
IMG-391160
 

Locate relevant marking.

21
IMG-373772
 

Measure and mark out the centre.

22
IMG-373773
 
23
IMG-373774
 
24
IMG-373775
 

Prepare the hole diameter.

25
IMG-391167
 

Install component that comes with the accessory kit.

26
IMG-391165
 
27
IMG-308085
 
28
IMG-308086
 

Remove the clips.

Fold the insulation to one side.

29
IMG-391181
 

Locate and disconnect the 2-pin connector that is taped to the car's cable harness.

30
IMG-391195
 

Pull the wiring through.

Refit the insulation.

Reinstall the clips.

31
IMG-391180
 

Reinstall the removed part.

32
IMG-391201
 

Connect the connector.

33
IMG-356971
 

Reinstall the removed parts in reverse order.