Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 Cross Country 2018
V60 Cross Country (-18) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313736321.031359331
Electric engine heater, passenger compartment connector




 

Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-345497
IMG-239664
IMG-239980
IMG-239981
IMG-300203

IMG-381504


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-292826
 

Remove the panel.

5
IMG-372426
 

Fold the carpet to the side.

6
IMG-372426
 

Fold the insulation to one side.

7
IMG-372440
 

Fold the insulation to one side.

8
IMG-372445
 

Locate the rubber grommet under the insulation and press it out.

9
IMG-372416
 
10
IMG-372419
 
11
IMG-345879
 

Note!
On some markets the rubber grommet may be covered by the heat shield.

12
IMG-381405
 

Note!
Orientation view

 

Vehicles with gasoline engines

13
IMG-381406
 

Release the lock.

14
IMG-381407
 
 

Accessory installation

15
IMG-372842
 

Caution!
No grease on contact surfaces.

Use: 1161427, Low temperature grease

16
IMG-381411
 
17
IMG-381438
 

Reinstall the removed part.

Install the catch.

18
IMG-382263
 

Note!
Note the position.

Install the clip(s).

19
IMG-372844
 
20
IMG-372846
 

Tighten the cable tie.

21
IMG-382264
 

Install the clips as illustrated.

Install the cables.

22
IMG-381443
 

Install the clips as illustrated.

Install the cable.

 

Vehicles with diesel engines

23
IMG-381459
 

Release the lock.

24
IMG-381463
 
25
IMG-381465
 

Reinstall the clips.

Install the catch.

26
IMG-382263
 

Install the clip(s).

27
IMG-372844
 
28
IMG-372846
 

Tighten the cable tie.

29
IMG-381470
 

Install the clips as illustrated.

Install the cable.

 

All vehicles

30
IMG-381477
 
31
IMG-372600
 
32
IMG-372601
 
33
IMG-372614
 
34
IMG-371373
 

Note!
Orientation view

35
IMG-371371
 

Caution!
Make sure that the rubber grommet seals properly to the body.

36
IMG-372473
 

Note!
Orientation view

37
IMG-372480
 

Remove the screws.

38
IMG-372474
 


Tightening torque: M8 , 24 Nm

Reinstall the screw.

39
IMG-372863
 
40
IMG-372867
 

Refit the insulation.

41
IMG-372865
 

Refit the insulation.

42
IMG-372868
 

Fold the floor carpet back.

43
IMG-372870
 

Take a scriber and make a hole in the carpet opposite the two holes in the bracket.

44
IMG-381502
 
45
IMG-372875
 

Make a cut in the mat.

46
IMG-372880
 
47
IMG-372599
 

Caution!
No grease on contact surfaces.

Use: 1161427, Low temperature grease

48
IMG-372881
 
49
IMG-381503
 

Install the catch.

 

Installation

50
 

Reinstall the removed parts in reverse order.