Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2011
V60 (-18) 2011

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
312850861.731285085, 31339972, 31359222
Parking assistance, rear




 

Special tools

 

999 7234 Hole stamp

Tool number:999 7234

Tool description:Hole stamp

Tool boards:80


Materials

Designation

Part number

Isopropanol

1161721

Sand paper P1000

Volvo Original Touch-up paint

Varnish 2-component

31335447

Activator

8637076


Equipment
IMG-242205
IMG-345497
IMG-239664

IMG-341611


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

After installation, the car must not be driven for 2 hours

After installation, the car must not be washed for 48 hours

When installing, the car must retain a temperature of 20 degrees C.

 

Vehicles with Skidplate

3
 

Note!
For information about installing the two inner sensor holders, see installation instruction 31265633.

 

All vehicles

4
IMG-340635
 
5
IMG-344142
 

Use: 1161721, Isopropanol

6
IMG-344141
 

Matt the surface gently.

Use: , Sand paper P1000

7
IMG-344142
 

Use: 1161721, Isopropanol

Do not touch the surface.

8
IMG-344251
 

Caution!
Protect connector surfaces against paint spray.


Note!
Paint the sensors the same colour code as the vehicle.

Use: , Volvo Original Touch-up paint

Use base coat only.

Use: 31335447, Varnish 2-component

Also see the instructions on the container.

9
IMG-333934
 

Caution!
First the paint must dry after painting.

10
IMG-332193
 

Set the ignition key to position 0.

11
IMG-340598
 
12
IMG-340599
 

Fold the carpet to the side.

Remove the cable harness clips.

Disconnect the connector.

13
IMG-340600
 
 

Vehicles with the 4C system.

14
IMG-340601
 
 

All vehicles

15
IMG-345113
 
16
IMG-340590
 
17
IMG-340589
 

Remove the screws.

18
IMG-340591
 

Remove the screws.

 

Cars with automatic transmissions

19
IMG-340596
 
20
IMG-293007
 

Release the shift-lock function.

Move the gear lever to D.

 

Cars with manual transmissions

21
IMG-345747
 

Release the lock ring which is located inside the gear lever boot.

Pull the locking sleeve and gear lever boot down. Take care so that the boot does not come loose from the lock ring.

22
IMG-348272
 

Release the lock.

 

All vehicles

23
IMG-340602
 

Caution!
Use suitable tape to protect the components.

24
IMG-340603
 
25
IMG-340604
 
26
IMG-340605
 

Remove the screws.

27
IMG-340607
 
28
IMG-340638
 
29
IMG-340639
 

Reinstall the removed parts in reverse order.

30
IMG-346181
 
31
IMG-347593
 
 

Removal

32
IMG-340640
 
33
IMG-346169
 
34
IMG-346177
 

Repeat the steps when removing on opposite side.

35
IMG-346178
 
 

Vehicles with keyless entry

36
IMG-346370
 
37
IMG-340645
 
38
IMG-340646
 
 

All vehicles

39
IMG-340647
 

Locate the markings for the positions.

40
IMG-340649
 
41
IMG-340650
 


Use special tool: T9997234, Hole stamp

42
IMG-340651
 

Clean the surfaces.

Allow to dry.

Use: 1161721, Isopropanol

43
IMG-341991
 

Clean the surface.

Allow to dry.

Use: 1161721, Isopropanol

44
IMG-340653
 

Clean the surface.

Allow to dry.

Use: 1161721, Isopropanol

45
IMG-340654
 

Apply a thin and even layer.

Allow to dry for at least 10 minutes.

Use: 8637076, Activator

46
IMG-341992
 

Apply a thin and even layer.

Allow to dry for at least 10 minutes.

Use: 8637076, Activator

47
IMG-340656
 

Apply a thin and even layer.

Allow to dry for at least 10 minutes.

Use: 8637076, Activator

48
IMG-344986
 
49
IMG-347917
 
50
IMG-343412
 
51
IMG-343413
 
52
IMG-343415
 

Release the lock.

Repeat on the other side.

53
IMG-343416
 
54
IMG-343418
 

Remove the screw.

55
IMG-343417
 
56
IMG-343420
 
57
IMG-343421
 
58
IMG-343422
 

Remove the screws.

59
IMG-343423
 
60
IMG-343424
 

Remove the screws.

61
IMG-307608
 
62
IMG-307609
 
63
IMG-347610
 

Remove the screws.


Tightening torque: M8 , 24 Nm

64
IMG-343425
 
 

Vehicles with keyless entry

65
IMG-346381
 

Locate the connector.

66
IMG-346386
 

Disconnect the connector.

67
IMG-346387
 

Unhook the clip(s).

68
IMG-346391
 
69
IMG-346396
 

The part is not to be reused.

 

Vehicles without keyless entry

70
IMG-348661
 
 

All vehicles

71
IMG-346411
 
72
IMG-346416
 
73
IMG-340668
 

Caution!
Make sure that the rubber grommet seals properly to the body.

74
IMG-346421
 
75
IMG-346431
 
 

Vehicles without keyless entry

76
IMG-346466
 

Tear off the excess foam tape.

 

Vehicles with keyless entry

77
IMG-346472
 
 

All vehicles

78
IMG-346506
 
79
IMG-346511
 
80
IMG-346516
 

Locate the existing connector in the vehicle's cable harness.

81
IMG-346521
 
82
IMG-346523
 
83
IMG-340682
 
84
IMG-340686
 
85
IMG-340688
 
 

Installation

86
IMG-340689
 

Note!
Prepare and install one holder at a time.

87
IMG-340690
 
88
IMG-340691
 

Note position of components.

89
IMG-340692
 
90
IMG-340694
 

Note!
Ensure that the tape is fixed to the surface.

91
IMG-340695
 

Repeat method steps for installing.

92
IMG-340696
 

Put the wiring in the Bumper cover without installing the wiring.

93
IMG-340697
 

Connect the two painted sensors to the external connections.

94
IMG-340698
 
95
IMG-340699
 
96
IMG-341996
 
97
IMG-340701
 
98
IMG-340702
 
 

Vehicles without keyless entry

99
IMG-348276
 
100
IMG-342949
 

Tear off the excess foam tape.

 

Vehicles with keyless entry

101
IMG-340705
 
 

All vehicles

102
IMG-346526
 

Reinstall the removed parts in reverse order.

103
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.