Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC70 2010
XC70 (08-) 2010

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314703561.332270870
Digital radio, DAB




IMG-394921




 
Equipment
IMG-242205
IMG-345497
IMG-239664

IMG-394782


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

3
IMG-332193
 

Set the ignition key to position 0.

 

Removal

4
IMG-395390
 
5
IMG-395396
 
6
IMG-395422
 

Remove the marked part.

7
IMG-395427
 
8
IMG-395409
 
 

Vehicles with subwoofer speaker

9
IMG-395146
 

Disconnect the connector.

10
IMG-395147
 

Remove the nuts.

Remove the screws.

11
IMG-395149
 

Remove the marked part.

 

Accessory installation

12
IMG-394788
 

Install component that comes with the accessory kit.

13
IMG-394790
 

Install component that comes with the accessory kit.

Install the screws.

14
IMG-342320
 
15
IMG-342321
 

Tighten the screw.


Tightening torque: M6 , 10 Nm

16
IMG-394806
 

Install component that comes with the accessory kit.

Fasten the wiring harness using the existing clips.

17
IMG-395171
 

Locate the pre-routed connectors.

Connect the connectors.

 

Vehicles with subwoofer speaker

18
IMG-395152
 

Reinstall the removed parts in reverse order.

19
IMG-395153
 

Reinstall the screws.


Tightening torque: M6 , 10 Nm

Install the nuts

20
IMG-395154
 

Connect the connector.

 

All vehicles

21
IMG-395755
 
22
IMG-395756
 
23
IMG-395760
 
24
IMG-242268
 

Note!
First, download the software for preparatory installation according to the accessory catalogue. Then do the download/reload of software for the accessory function.


Note!
When doing an aftermarket installation of DAB or DAB+, it is necessary to carry out a DAB application download.


Note!
When upgrading from DAB to DAB+, a DAB re-load is necessary.

Carry out a download, or a re-load, of accessory function software by following VIDA service information.