Excl. AU, CL, PE, BR
Op. No.: 89204 89208
A towbar with a unique design for S40 and V50, that is easy to install when needed. When it is not needed, it is easily removed and all that can be seen is the fully covering protective cover. The cars are fully prepared with weld nuts in the body and a clear marking for cut-out in the bumper casing.
|31269516||08-, High towbar (for cars without level control)||Installation Instruction|
|31269539||08-, Low towbar (for cars with level control)||Installation Instruction|
For cars with diesel engine and manual transmission: If the car is driven with a major load in a hot climate, the engine cooling fan should be replaced with one of a greater capacity than the standard model. This avoids temporary shut-off of the air conditioning and temporary lowering of engine torque.
|31261986||Diesel, 1.6, Cooling fan|
Facts and advantages
Thoroughly tested both in the laboratory and on the test track to fulfill Volvo's strict requirements for quality and durability
Surface treated in several stages for the best corrosion resistance
Delivered complete with required bolts, nuts, electrical bracket, reinforcement bar, protective cover, storage pouch for the ball mechanism, handling instructions, decals and installation instructions.
The safety cable anchorage is clearly located and easily accessible
The ball section is easy to remove when the towbar is not in use
The ball section has protection against theft with a lock
The towball can be stored in the spare wheel well according to the installation instructions
Approved according to EU directive 94/20/EC
13.2 kg (29 lbs)
Max. towing capacity:
1500 kg (3300 lbs)
Max. ball pressure:
75 kg (170 lbs)
Please see VIDA for correct spare parts towbar cover. First see the towbar type plate for the towbar part number.
The towbar is tested for the maximum towing weight and ball pressure, but this can be lower depending on the car version. For precise information, check car version and refer to the car's owner's manual.