Workshop installation recommended
Excl. AU, CL, PE, BR
Op. No.: 89208 89204
A towbar uniquely designed for the car. Easy to mount whenever needed. When not in use, it is simply removed and the only thing that is visible is the fully covering protective cover.
The car's bodywork is prepared with holes in the side member, and there is a clear marking on the bumper casing for the cutout.
High towbar (for cars without level control)1
Low towbar (for cars with level control)
Facts and advantages
Thoroughly tested both in the laboratory and on the test track to fulfill Volvo's strict requirements for quality and durability
Surface treated in several stages for the best corrosion resistance
The ball section is easy to remove when the towbar is not in use
The ball section has protection against theft with a lock
The safety cable anchorage is clearly located and easily accessible
Supplied complete with the bolts, nuts, electrical bracket, protective cover, storage bag for the ball mechanism, handling instructions and decals
Cars equipped with Four-C must use towbars designed for cars without level control.
Approved according to EU directive 94/20/EC
approx. 16 kg
Max. towing capacity:
2000 kg (4400 lbs)
Max. ball pressure:
90 kg (200 lbs)
Not suitable for S80L.
Please see VIDA for correct spare parts cover. The tow hitch part number is on its type plate.
The towbar is tested for the maximum towing weight and ball pressure, but this can be lower depending on the car version. For precise information, check car version and refer to the car's owner's manual.
- Cars equipped with Four-C must use towbars intended for cars without level control.