| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | IMG-440436 |
|
| | Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components. Used for accessory components.
|
| | Disconnecting the battery |
| | IMG-426135 |
|
| | |
| | IMG-400002 |
|
| | Remove the battery's negative cable. Tightening torque: Battery cable for battery
, 6 Nm
|
| | |
| | IMG-430856 |
|
| | |
| | IMG-456025 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-456026 |
|
| | |
| | IMG-456027 |
|
| | |
| | IMG-457305 |
|
| | Remove the clips. Remove the marked part. |
| | IMG-459941 |
|
| | Lift the marked component up |
| | IMG-456216 |
|
| | Remove the clips. Remove the marked part. |
| | IMG-457360 |
|
| | Loosen the screws. Remove the marked part. |
| | IMG-459715 |
|
| | |
| | IMG-403425 |
|
| | Remove the marked detail/details. Use: Pliers 31423632
|
| | IMG-426018 |
|
| | Remove the screws. Remove the marked part. |
| | IMG-459717 |
|
| | Remove the screws. Remove the marked part. |
| | IMG-459719 |
|
| | Remove the screws. Remove the marked part. |
| | IMG-459720 |
|
| | |
| | IMG-457295 |
|
| | |
| | Vehicles with air suspension |
| | IMG-430818 |
|
| | |
| | |
| | IMG-459738 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-430845 |
|
| | |
| | |
| | IMG-430741 |
|
| | |
| | IMG-430742 |
|
| | |
| | IMG-430740 |
|
| | |
| | IMG-456272 |
|
| | Install component that comes with the accessory kit. Check that the flange of the part is in full contact with bumper cover. Adjust the hole with a file or knife as necessary. |
| | IMG-456274 |
|
| | Install component that comes with the accessory kit. |
| | IMG-457303 |
|
| | |
| | IMG-456301 |
|
| | Note! Do not fully tighten the nut yet. |
Install components that come with the accessory kit. |
| | IMG-456305 |
|
| | Install component that comes with the accessory kit. This is used as a counterhold. |
| | IMG-457065 |
|
| | Tighten the nut. Use hands only. |
| | IMG-459938 |
|
| | Position/route the cables as illustrated. |
| | IMG-459936 |
|
| | |
| | IMG-459750 |
|
| | |
| | IMG-400004 |
|
| | Note! Images are displayed without front fender. |
|
| | IMG-459752 |
|
| | Install components that come with the accessory kit. Tighten the screw 2 turns. |
| | IMG-458105 |
|
| | Assemble components that come with the accessory kit. |
| | IMG-440310 |
|
| | Lubricate the O-ring. Use: 1161427, Low temperature grease
|
| | IMG-459765 |
|
| | Connect the cable. Install the catch. |
| | IMG-459753 |
|
| | Install the marked components. Install the screws. |
| | IMG-459756 |
|
| | |
| | IMG-459536 |
|
| | Use detail according to image. Adjust the position of the component according to image. |
| | IMG-459911 |
|
| | Position/route the cables as illustrated. Install the cables. Use a cable tie |
| | IMG-459912 |
|
| | Position/route the cable as illustrated. Install the cables. Use a cable tie |
| | IMG-459913 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-459915 |
|
| | Pull the wiring harness through. |
| | IMG-459914 |
|
| | |
| | IMG-459916 |
|
| | Lift the marked component up Pull the wiring harness through.
|
| | IMG-449536 |
|
| | Install component that comes with the accessory kit. |
| | IMG-459917 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-460679 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-459926 |
|
| | Pull the wiring harness through. |
| | IMG-459928 |
|
| | |
| | IMG-459930 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-456951 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-457127 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-457495 |
|
| | Remove the nut. The item is to be reused. |
| | IMG-457411 |
|
| | Position wire as illustrated. |
| | IMG-457465 |
|
| | Connect the prerouted cable. Install the nut. Tightening torque: Nut (M8), to BCSM
, 24 Nm
|
| | IMG-459940 |
|
| | Install the cable. Use a cable tie |
| | IMG-430880 |
|
| | |
| | IMG-430905 |
|
| | Release the catches. Fold marked part aside. |
| | IMG-457129 |
|
| | Remove the nut. The item is to be reused. |
| | IMG-457110 |
|
| | Connect the prerouted cables. Install the nut. Tightening torque: M6
, 10 Nm
|
| | IMG-457111 |
|
| | Reinstall the removed part. |
| | |
| | Reinstall the removed parts in reverse order. |
| | IMG-405228 |
|
| | Note! Make sure to follow the sequence indicated. |
Tightening torque: Aluminum wheel rim to wheel hub Stage 1:
4 Nm Stage 2:
50 Nm Stage 3:
140 Nm
|
| | IMG-400003 |
|
| | Reinstall the battery's negative cable. Tightening torque: Battery cable for battery
, 6 Nm
|
| | IMG-394531 |
|
| | Warning! The first time the vehicle is activated after the battery has been disconnected, this must be performed from the rear seat, avoid the work area for the air bags. |
|