Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Remove the part carefully

Disconnect the connector.

Remove the marked part.

Accessory installation

Install component that comes with the accessory kit.

Place the component where indicated in the graphic.

Install component that comes with the accessory kit.

Ensure that all clips engage.

Installation

Locate the pre-routed connector.

Connect the connectors.

Install the marked component.

1. Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

2. Install preparatory installation application

3. Close / disconnect the vehicle tab in VIDA and reconnect. Make a new read out when prompted.

4. Install movement sensor application.