Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Conditions

There may be parts in the accessories kit that are not needed for this installation.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

7. Used for accessory components.

Removal

Open the hood.

Remove the marked part.

Remove the marked part.

Remove the screw.

Remove the marked part.

Remove the marked part.

Remove the screws.

Tightening torque: Front seat to body , 40 Nm

Remove the screws.

Tightening torque: Front seat to body , 40 Nm

Disconnect the connector.

Unhook the cable harness clips.

Remove the marked part.

Disconnecting the battery

Remove the battery's negative cable.

Tightening torque: Battery cable for battery , 6 Nm

Removal

Remove the nut.

Fold marked part aside.

Tightening torque: M6 , 10 Nm

Remove the marked detail/details.

Remove the nuts.

Remove the cable tie(s).

Loosen the marked detail.

Remove the marked part.

Remove the marked part.

Accessory installation

Connect the cable.

Install component that comes with the accessory kit.

Connect the cable.

Install component that comes with the accessory kit.

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

Ground connection

Release the catches.

Fold marked part aside.

Remove the nut.

The item is to be reused.

Connect the prerouted cable.

Install the nut.

Tightening torque: M6 , 10 Nm

Reinstall the removed part.

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Disconnect the connector.

Unhook the cable harness clips.

Connect the prerouted cable.

Connect the prerouted cable.

Connect the connector.

Install the connector to its attachment.

Install the cable.

Use a cable tie

Release the connector's primary lock.

Disconnect the connector.

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Vehicles early version

The item is not to be reused.

Use special tool: T9512631, Terminal removal tool (Color code: Brown)

All vehicles

Connect the prerouted cable.

Connect the connector.

Install the catch.

Install the cable.

Use a cable tie

Reinstall the removed parts in reverse order.

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.