Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Remove the panel.

Disconnect the connector, if applicable.

Repeat on the other side.

Remove the panel.

Repeat on the other side.

Remove the panel.

Repeat on the other side.

Remove the screws.

Remove the panel.

Remove the marked part.

Disconnect the connector.

Remove the screws.

Remove the panel.

Disconnect the connector.

Remove the screws.

Remove the marked part.

The part is not to be reused.

When removing on right-hand drive cars, perform the procedures on the opposite side and/or mirrored.

Accessory installation

Connect the connectors.

Install component that comes with the accessory kit.

Install the screws.

Install the connector to its attachment.

Connect the connector.

Repeat the steps when installing accessories on opposite side.

Reinstall the removed parts in reverse order.

Removal

Remove the panel.

Remove the panel.

Remove the screws.

The part is to be reused.

Remove the marked part.

The part is not to be reused.

Repeat the steps when removing on opposite side.

Accessory installation

Install component that comes with the accessory kit.

Install the screws.

Repeat the steps when installing on opposite side.

Reinstall the removed parts in reverse order.