Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2017
XC90 (16-) 2017 D4204T6, XC90 (16-) 2017 D4204T14, XC90 (16-) 2017 D4204T23

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313990111.231454669, 31399007
Electric engine heater, 230 V




IMG-403412




 

Special tools

 

951 2955 Cover

Tool number:951 2955

Tool description:Cover

Tool boards:20

 

951 2957 Coolant Reservoir

Tool number:951 2957

Tool description:Coolant Reservoir

Tool boards:20


Equipment
IMG-345497
IMG-239664
IMG-239980
IMG-240693
IMG-239681

IMG-391286


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-382528
 

Open the hood.

4
IMG-404645
 

Fold marked part aside.

5
IMG-404650
 

Remove the marked part.

6
IMG-404655
 

Remove the marked part.

7
IMG-382204
 

Remove the clips.

Remove the screws.

Remove the marked part.

8
IMG-387143
 

Remove the clips.

9
IMG-392033
 

Note!
Orientation view

10
IMG-391976
 

Note!
Close the drain cock after the coolant has drained.

Place a container under the car.

Drain the coolant.

11
IMG-403416
 

Note!
Orientation view

12
IMG-403425
 

Remove the marked part.

Use: Pliers

13
IMG-403428
 

Remove the screws.

14
IMG-403430
 

Remove the marked part.

15
IMG-398442
 

Remove the screws.

Remove the clips.

16
IMG-398445
 

Remove the nuts.

Remove the screw.

17
IMG-398443
 

Remove the screws.

Remove the marked part.

18
IMG-398446
 

Remove the screw.

Remove the clips.

19
IMG-397073
 

Remove the marked part.

 

Accessory installation

20
IMG-398765
 
21
IMG-399407
 

Locate relevant marking.

Use: Air-powered air saw

Adjust the hole with a file or knife as necessary.

22
IMG-404675
 

Install component that comes with the accessory kit.

Pull the wiring through.

23
IMG-392461
 
  1. Install component that comes with the accessory kit.

  2. Use hands only.

24
IMG-404682
 

Note!
Note the position.

25
IMG-392261
 

Tighten the nut.

26
IMG-391301
 

Install the clip(s).

Tighten the cable tie.

27
IMG-391565
 

Note!
Orientation view

28
IMG-391573
 

Release the catches.

Fold marked part aside.

29
IMG-391924
 

Remove the nut.

The part is to be reused.

30
IMG-404695
 

Connect the prerouted cable.

31
IMG-404700
 

Install the nut.


Tightening torque: M6 , 10 Nm

32
IMG-391930
 

Press until a click is heard.

33
IMG-391915
 

Caution!
No grease on contact surfaces.

Lubricate the O-ring.

34
IMG-405625
 

Install component that comes with the accessory kit.

Connect the cable.

35
IMG-405626
 

Install the catch.

36
IMG-391381
 

Install the clip(s).

Tighten the cable tie.

37
IMG-403850
 

Note!
Orientation view

38
IMG-391380
 

Install the clip(s).

Tighten the cable tie.

39
IMG-391395
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.

40
IMG-391422
 

Install component that comes with the accessory kit.

41
IMG-391908
 

Tighten the screw.


Tightening torque: M6 , 10 Nm

42
IMG-391906
 

Remove the screw.

The part is to be reused.

43
IMG-391910
 
  1. Fold marked part aside.

  2. Install component that comes with the accessory kit.

  3. Tighten the screw.

44
IMG-391420
 

Install component that comes with the accessory kit.

Tighten the hose clamps.

45
IMG-391915
 

Caution!
No grease on contact surfaces.

Lubricate the O-ring.

46
IMG-391913
 

Connect the connector.

Install the catch.

 

Installation

47
IMG-404661
 

Note!
Always follow the manufacturer's instructions when handling the equipment.


Use special tool: T9512955, Cover

Use special tool: T9512957, Coolant Reservoir

Fill with coolant and run the engine to operating temperature.

Post-fill the cooling system if necessary.

48
IMG-377070
 

Reinstall the removed parts in reverse order.

49
IMG-405228
 

Note!
Make sure to follow the sequence indicated.


Tightening torque: Aluminum wheel rim to wheel hub
Stage 1: 4 Nm
Stage 2: 50 Nm
Stage 3: 140 Nm