2011 L.H.D

Towbar hitch

Towbar hitch
Find a Dealer


Op. No.: 89204 89208

A tow hitch for the car, specially developed for the North American market. The ball part is very easy to handle. If you want to remove it, to make room for hitch-mounted accessories, you only need to remove a pin.

The towbar consists of three main components: crossmember, ball holder and a ball with a diameter of 2". The car has provision in the bodywork for installation.

If you choose to not have the ball or any of our accessories installed, a protective cover that covers the hole in the cross member is supplied.

Member kit

Part. No.Description
313594654/7 pinInstallation Instruction
+ Ball mount 2", Class 2
Part. No.
+ Ball 2", Class 2
Part. No.

Facts and advantages

  • Thoroughly tested both in the laboratory and on the test track to fulfill Volvo's strict requirements for quality and durability

  • Surface treated in several stages for the best corrosion resistance

  • The safety cable anchorage is clearly located and easily accessible

  • The ball section is easy to remove when the towbar is not in use

  • Approved to VESC V-5

Technical data

Accessory weight:

Member kit:

35 lbs (15.8 kg)

Ball holder

6.2 lbs (2.8 kg)


2.0 lbs (0.9 kg)

Towball diameter:

2" Class 2

Max. towing capacity:

3500 lbs / 1600 kg

Max. ball pressure:

350 lbs / 160 kg




The towbar is tested for the maximum towing weight and towball load, but depending on the car version, it may be lower. For precise information, check car variant and refer to the car's owner's manual.


Cannot be combined with hitch mounted accessories designed for 50 mm ball diameter.

Last updated: 4/28/2022