Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Further information

When installing, the car must retain a temperature of 20 degrees C.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Turn off the ignition.

Removal

Remove the screws.

Remove the screws.

On both sides.

Disconnect the connector.

On both sides.

Remove the cable harness clips.

Remove the screws.

Remove the panel.

Accessory installation

Vehicles with detachable towbar

Locate relevant marking.

Apply tape to the other side, opposite the marking lines.

Deburr edges

Vehicles with fixed towbar

Locate relevant marking.

Apply tape to the other side, opposite the marking lines.

Deburr edges

All vehicles

Reinstall the removed parts in reverse order.