Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 Cross Country 2020

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316594341.032204590
Protective grille, steel




 

IMG-457905


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
IMG-400004
 

Warning!
The front mounting must not be used when installing load compartment grille. Use rear mounting!


Caution!
Be extra careful when removing or installing this component.


Caution!
Make sure not to damage painted surfaces.

The work may only be performed by trained personnel and at an approved location for this type of work.

 

Color symbols

3
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Preparation

4
IMG-407110
 
5
IMG-415787
 

Repeat on the other side.

6
IMG-411070
 
 

Removal

7
IMG-457915
 

Remove the marked part.

Use: Interior trim remover

Component is to be stored in a suitable place in the car.

Repeat on the other side.

 

Accessory installation

8
IMG-448767
 

Install components that come with the accessory kit.

9
IMG-448780
 

Place the component where indicated in the graphic.

10
IMG-448799
 

Use detail according to image.

11
IMG-448776
 

Install component that comes with the accessory kit.

12
IMG-448784
 

Turn marked detail while pushing the mounting to make the detail fit the mounting outlet

13
IMG-448777
 

Remove the marked part.

14
IMG-448778
 

Install component that comes with the accessory kit.

Use hands only.

15
 

Repeat all method steps for the other side.

16
IMG-457957
 

Install component that comes with the accessory kit.

17
IMG-457929
 

Install component that comes with the accessory kit.

Use hands only.

Repeat on the other side.

18
IMG-457935
 

Tighten the bolts.

Repeat on the other side.