Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

7. Used for accessory components.

Removal

Remove the panel.

Use hands only.

Remove the screw.

Remove the panel.

Release the catch.

Remove the marked part.

Remove the panel.

Use hands only.

Remove the marked part.

Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Remove the screw.

Tightening torque: Cargo anchor, to body , 24 Nm

Remove the marked part.

Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Remove the screw.

Tightening torque: Cargo anchor, to body , 24 Nm

Remove the marked part.

Remove the screws.

Remove the marked part.

Remove the marked part.

Use: Interior trim remover

The part is to be reused.

Repeat on the other side.

Remove the panel.

Disconnect the connectors.

Remove the screws.

Remove the panel.

Accessory installation

Disconnect the connector.

Install component that comes with the accessory kit.

Connect the connectors.

Attach the connector to the wiring harness.

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Connect the connector.

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Reinstall the removed part.

Reinstall the screws.

Reinstall the removed part.

Connect the connectors.

Install the marked component.

Repeat on the other side.

Connect the connector.

Install the marked component.

Reinstall the screws.

Remove the protective film.

Remove any traces of glue.

Använd en blandning av 50% Volvo koncentrerad spolarvätska och 50% vatten.

Repeat on the other side.

Installation

Reinstall the removed parts in reverse order.