Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Preparation

Open the tailgate.

Accessory installation

Install component that comes with the accessory kit.

Place the component where indicated in the graphic.

Place the component where indicated in the graphic.

Applies to the left-hand side:

Applies to the right-hand side

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Applies to the left-hand side:

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Applies to the right-hand side

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Install component that comes with the accessory kit.

Install component that comes with the accessory kit.

Applies to the left-hand side:

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Install component that comes with the accessory kit.

Install component that comes with the accessory kit.

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Press the marked component.

Use hands only.

Fold marked part aside.

Install component that comes with the accessory kit.

Vehicles with protective grille, steel

To access cargo anchor.

Applies to the right-hand side

Measure and mark as illustrated.

Cut the component following the instructions in the graphic.

Applies to the left-hand side:

Measure and mark as illustrated.

Cut the component following the instructions in the graphic.

Vehicles with longitudinal load compartment divider

Measure and mark as illustrated.

Cut the component following the instructions in the graphic.

Vehicles with dog gate

Measure and mark as illustrated.

Cut the component following the instructions in the graphic.

Measure and mark as illustrated.

Cut the component following the instructions in the graphic.

Vehicles with folding towbar

Vehicles with air suspension

All vehicles

Allow the Bumper Protection to adhere to the Bumper Cover as indicated.