| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
|  | | IMG-332179 |
|
| | Set the ignition key to position 0. Remove the battery's negative cable. |
| | |
|  | | IMG-363036 |
|
| | Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
| | |
|  | | IMG-292804 |
|
| | |
|  | | IMG-292826 |
|
| | |
|  | | IMG-346036 |
|
| | |
|  | | IMG-345113 |
|
| | Carefully pry loose the bottom edge of the panel and then continue around the panel. |
|  | | IMG-340590 |
|
| | Disconnect the connector. |
|  | | IMG-340985 |
|
| | |
|  | | IMG-340987 |
|
| | |
|  | | IMG-292806 |
|
| | |
|  | | IMG-292823 |
|
| | Remove the cable harness clips. Disconnect the connector. |
| | Vehicles with the 4C system. |
|  | | IMG-292827 |
|
| | Disconnect the connector. |
| | Cars with automatic transmissions |
|  | | IMG-293006 |
|
| | |
|  | | IMG-293007 |
|
| | Release the shift-lock function. |
| | |
|  | | IMG-340981 |
|
| | |
|  | | IMG-340604 |
|
| | Disconnect the connector. |
|  | | IMG-340605 |
|
| | |
|  | | IMG-340607 |
|
| | |
|  | | IMG-380815 |
|
| | |
| | |
|  | | IMG-380819 |
|
| | |
|  | | IMG-380816 |
|
| | |
| | |
|  | | IMG-340988 |
|
| | |
|  | | IMG-340989 |
|
| | Remove the part carefully |
|  | | IMG-380933 |
|
| | Disconnect the connectors. |
|  | | IMG-374439 |
|
| | |
|  | | IMG-374438 |
|
| | |
|  | | IMG-374497 |
|
| | |
|  | | IMG-374495 |
|
| | Disconnect the connector. |
| | |
|  | | IMG-374547 |
|
| | Install component that comes with the accessory kit. |
|  | | IMG-362040 |
|
| | Locate the existing connector in the vehicle's cable harness. Connect the connector. |
|  | | IMG-374510 |
|
| | Tear off the excess foam tape. Clamp the cables and connectors to the existing cables to prevent noise. |
|  | | IMG-380923 |
|
| | |
|  | | IMG-380925 |
|
| | Install the clips as illustrated. |
|  | | IMG-380941 |
|
| | Connect the prerouted cable. |
|  | | IMG-380943 |
|
| | |
| | Reinstall the removed parts in reverse order. |
| | |
|  | | IMG-374244 |
|
| | |
|  | | IMG-340576 |
|
| | |
|  | | IMG-340547 |
|
| | |
|  | | IMG-340581 |
|
| | |
|  | | IMG-340552 |
|
| | |
|  | | IMG-340528 |
|
| | |
|  | | IMG-340524 |
|
| | |
|  | | IMG-374266 |
|
| | |
|  | | IMG-374267 |
|
| | |
| | Vehicles with 5-cyl engines |
|  | | IMG-345234 |
|
| | |
|  | | IMG-345235 |
|
| | |
| | |
|  | | IMG-345236 |
|
| | |
|  | | IMG-345397 |
|
| | |
|  | | IMG-345237 |
|
| | |
|  | | IMG-345238 |
|
| | |
|  | | IMG-340716 |
|
| | Locate the rubber grommet under the insulating mat. |
|  | | IMG-374511 |
|
| | Fold the floor carpet back. Pull the wiring through. |
|  | | IMG-345239 |
|
| | |
| | |
|  | | IMG-340606 |
|
| | Fold the insulation aside.
Use special tool: T9512932, Tension spring
|
|  | | IMG-340721 |
|
| | |
|  | | IMG-353681 |
|
| | Use: Expander pliers
Use: 1161427, Low temperature grease
|
|  | | IMG-374512 |
|
| | |
|  | | IMG-340726 |
|
| |
Use special tool: T9512932, Tension spring
Pull the wiring through. |
|  | | IMG-374513 |
|
| | Route the cable harness to the existing cable harness. |
|  | | IMG-340539 |
|
| | Route the cable harness to the existing cable harness. |
|  | | IMG-374322 |
|
| | |
| | Vehicles without Active Grille Shutter |
|  | | IMG-340538 |
|
| | |
|  | | IMG-374341 |
|
| | |
| | Vehicles with Active Grille Shutter |
|  | | IMG-340733 |
|
| | |
|  | | IMG-340611 |
|
| | |
|  | | IMG-340737 |
|
| | |
|  | | IMG-374363 |
|
| | |
|  | | IMG-375758 |
|
| | Note!
This step is easier with two people. |
|
|  | | IMG-375748 |
|
| | Use: Angle drill machine
Use special tool: T9997482, Cutting tool
|
|  | | IMG-375795 |
|
| |
Use special tool: T9997482, Cutting tool
|
|  | | IMG-375753 |
|
| | Use: Angle drill machine
Use special tool: T9997482, Cutting tool
|
|  | | IMG-375800 |
|
| | |
|  | | IMG-347781 |
|
| | |
|  | | IMG-347786 |
|
| | |
|  | | IMG-374396 |
|
| | |
|  | | IMG-374391 |
|
| | |
|  | | IMG-374418 |
|
| | |
| | Reinstall the removed parts in reverse order. |
|  | | IMG-336901 |
|
| | Reinstall the battery's negative cable. |
|  | | IMG-336904 |
|
| | Warning!
When switching the ignition on for the first time after a battery disconnect and connect, make sure to stand outside the vehicle and only reach into the vehicle keeping clear of the air bag deployment areas. |
|
|  | | IMG-242268 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number. Order and download software according to: 31285245
|
