Excl. AU, CL, PE
Op. No.: 89208
A towbar uniquely designed for the car. Easy to mount whenever needed. When not in use, it is simply replaced with the supplied fully covering protective cover.
The car's bodywork is prepared with holes for installation, and there is a marking on the bumper casing for the cutout.
| Part. No. | ||
| 31454314 | Installation Instruction |
| Part. No. | Description | |
| 31213271 | -13, standard | |
| 30758125 | -13 , Only for R-design. |
Facts and advantages
Thoroughly tested both in the lab and on the test track to fulfill Volvo's stringent requirements for quality and durability.
Surface treated in several stages for the best corrosion resistance
Supplied complete with the required bolts, nuts, electrical bracket, storage bag for the ball mechanism, handling instructions and decals
The safety cable anchorage is clearly located and easily accessible
The ball section is easy to remove when the towbar is not in use
The ball section has protection against theft with a lock
Approved according to EU directive ECE R55
Technical data
Accessory weight: | 17.3 kg (38 lbs) |
Towball diameter: | 50 mm |
Max. towing capacity: | 2000 kg (4400 lbs) |
Max. ball pressure: | 90 kg (200 lbs) |
Photo: | VCC_04774 |
Note!
Please see VIDA for correct spare parts towbar cover. First see the towbar type plate for the towbar part number.
Note!
The towbar is tested for the maximum towing weight and towball load, but depending on the car version, it may be lower. For precise information, check car variant and refer to the car's owner's manual.
