Op. No.: 89142-2
A specially designed transport system for loads on the roof. The load carriers are two swept aluminium profiles and feet with full-coverage black plastic casings.
The load carriers have T-tracks for mounting accessories and the rubber mouldings are designed for direct T-track mounting without the need for cutting.
The aerodynamically shaped wing profile has been optimised to give minimal wind resistance and wind noise, which makes the car journey more comfortable.
Lock kit can be installed and allows use of the same key for the load carrier and roof load accessory.
Facts and advantages
Aerodynamic wing profile with T-track.
Assembly kit containing two load carriers with mountings.
Includes torque wrenches with tightening torques.
All load carrier accessories fit:
- Ski carrier/Snowboard carrier
- Bicycle holder
- Roof box
- Kayak cradle, folding
Some load carrier accessories must be adapted to fit the T-track.
Thoroughly tested in both the laboratory also on the test track.
"City Crash"-tested .1
Aluminium with protective cover in TPE
Black with aluminium profile
Max. load capacity:
With the load carrier fitted, the height will be 13 cm higher from the roof where the load carrier is fitted. See the owner's manual for more dimensions.
Taking the load carriers off when not in use saves both fuel and the environment. You also reduce the noise level in the passenger compartment.
The load carrier cannot be used in combination with "Canoe/kayak holder".
- City Crash-test according to ISO 11154-5 / DIN 75302