Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC70 2015
XC70 (08-) 2015

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322709091.032270868
Digital radio, DAB




 

Special tools

 

951 2620 Stripping tool (for wiring)

Tool number:951 2620

Tool description:Stripping tool (for wiring)

Tool boards:39

 

951 2785 Crimping tool (included in 9512669)

Tool number:951 2785

Tool description:Crimping tool (included in 9512669)

Tool boards:39

 

951 2777 Hot-air gun

Tool number:951 2777

Tool description:Hot-air gun

Tool boards:08



IMG-460759

IMG-461221


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
IMG-400004
 

Caution!
Attach the antenna wires using tape. Cable ties or similar must not be used.


Caution!
Observe caution when handling fibre optic cables.


Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

 

Color symbols

3
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

4
IMG-461362
 

Remove the marked part.

Disconnect any connector(s).

5
IMG-461366
 
6
IMG-461367
 

Loosen the marked detail.

7
IMG-461368
 

Remove the marked part.

8
IMG-462186
 

Remove the screw.

9
IMG-462016
 

Remove the marked part.

10
IMG-462062
 

Remove the marked part.

11
IMG-462066
 

Remove the screw.

12
IMG-462068
 

Remove the panel.

13
IMG-460936
 
14
IMG-460937
 

Remove the screws.


Tightening torque: M6 , 10 Nm

15
IMG-462191
 

Fold marked part aside.

16
IMG-462200
 

Remove the screw.


Tightening torque: M8 , 24 Nm

17
IMG-462076
 

Remove the marked part.

18
IMG-354313
 

Remove the panel.

Disconnect the connector, if applicable.

19
IMG-354315
 

Remove the weatherstrip.

20
IMG-354318
 

Caution!
The front and upper sill panel must be removed and installed as one unit.

21
IMG-354319
 
22
IMG-344930
 
23
IMG-340979
 
24
IMG-340980
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

25
IMG-303005
 
26
IMG-303006
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

27
IMG-331668
 
 

Alternative 1

28
IMG-380657
 
 

Alternative 2

29
IMG-380655
 
30
IMG-380656
 
 

All vehicles

31
IMG-329151
 
32
IMG-373198
 

Note!
Orientation view

33
IMG-329209
 

Loosen the screws.

Disconnect the connector.

34
IMG-382639
 

Disconnect the connector, if applicable.

35
IMG-329153
 

Caution!
Be extra careful when removing or installing this component.

36
IMG-460418
 

Remove the screws.

Loosen the marked detail.


Tightening torque: M6 , 10 Nm

 

Vehicles with High Performance Sound

37
IMG-460425
 

Disconnect the connector.

 

Vehicles with Premium Sound

38
IMG-460422
 

Disconnect the connector.

39
IMG-460609
 

Note!
Orientation view

 

Accessory installation

40
IMG-460610
 

Loosen the tape temporarily.

The item is to be reused.

41
IMG-460611
 
42
IMG-460426
 


Use special tool: T9512620, Stripping tool (for wiring)

43
IMG-460764
 

Use detail according to image.

44
IMG-460428
 


Use special tool: T9512620, Stripping tool (for wiring)

45
IMG-460373
 
46
IMG-460547
 


Use special tool: T9512785, Crimping tool (included in 9512669)

47
IMG-460375
 

Caution!
Make sure that the surrounding components are protected from heat.


Use special tool: T9512777, Hot-air gun

48
IMG-460376
 
49
IMG-460660
 
50
IMG-460520
 

Connect the connectors.

51
IMG-460836
 

Fold the carpet aside.

52
IMG-460512
 

Remove the screw.

53
IMG-460511
 

Connect the ground cable.

Reinstall the screw.

54
IMG-460516
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

55
IMG-460839
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

56
IMG-460840
 

Fold the floor carpet back.

57
IMG-460843
 

Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Place the overlap of the cable mat under the amplifier.

Reinstall the removed part.

Reinstall the screws.


Tightening torque: M6 , 10 Nm

 

Removal

58
IMG-395390
 
59
IMG-462206
 

Remove the part carefully

60
IMG-462214
 

Disconnect the connector.

Remove the marked part.

61
IMG-462216
 

Remove the screw.


Tightening torque: Panel roof sill to body , 5 Nm

62
IMG-462217
 

Remove the panel.

63
IMG-462223
 
64
IMG-462259
 
65
IMG-462261
 

Remove the marked part.

66
IMG-395396
 

Lift the marked component up

67
IMG-395422
 

Remove the marked part.

68
IMG-395427
 

Remove the marked part.

69
IMG-395409
 

Remove the marked part.

 

Accessory installation

70
IMG-460480
 

Assemble components that come with the accessory kit.

71
IMG-460484
 

Install component that comes with the accessory kit.

72
IMG-460844
 
73
IMG-460848
 
74
IMG-460871
 
75
IMG-460550
 

Install component that comes with the accessory kit.

76
IMG-462849
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

77
IMG-460925
 

Connect the connectors.

 

Removal

78
IMG-462275
 

Caution!
Take extra care not to crease the headliner.

79
IMG-462277
 

Remove the screw.

80
IMG-462950
 

Disconnect the connectors.

Remove the marked part.

 

Accessory installation

81
IMG-460766
 

Use details according to image.

82
IMG-460546
 

Assemble components that come with the accessory kit.

Depress the secondary lock.

83
IMG-462966
 

Install the screw.

Connect the connector.

84
IMG-462969
 

Connect the connectors.

85
IMG-463072
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

86
IMG-463070
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

87
IMG-463073
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

88
IMG-463082
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

89
IMG-463084
 

Connect the connector.

90
IMG-461200
 
91
 

Reinstall the removed parts in reverse order.

92
IMG-400003
 

Reinstall the battery's negative cable.

93
IMG-400006
 

Order and download software according to VIDA/SOFTWARE.

Order and download software according to: 30786292

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31266811