Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2021
V60 (19-) 2021

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316502941.031650288
Mudflaps, rear




 
Equipment
IMG-345497
IMG-268803
IMG-239981
IMG-239940

IMG-442469


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

3
IMG-441867
 

Remove the marked part.

4
IMG-441820
 

Remove the marked part.

5
IMG-442470
 

Loosen the screws.

6
IMG-442475
 

Wipe off

7
IMG-442476
 

Wipe dry.

8
IMG-442477
 

Fold the wing liner aside.

 

Accessory installation

9
IMG-442479
 

Place the component where indicated in the graphic.

10
IMG-442480
 

Locate the existing holes.

Make a hole, using the tool indicated.

11
IMG-442490
 

Place the component where indicated in the graphic.

12
IMG-442491
 

Note!
Ensure that the component is in contact with the surface, with no space.

Install component that comes with the accessory kit.

Tighten the bolts.

13
IMG-442495
 
14
IMG-442501
 

Install component that comes with the accessory kit.

15
 

Repeat all method steps for the other side.

16
 

Reinstall the removed parts in reverse order.