Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 2013
V40 (13-) 2013

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313397041.131339699
Load compartment grille, steel




 

Special tools

 

951 2782 Rivet nut tool

Tool number:951 2782

Tool description:Rivet nut tool

Tool boards:08


Equipment
IMG-345497
IMG-239660
IMG-351622
IMG-239981

IMG-362403


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-362454
 
 

Accessory installation

4
IMG-362448
 

Measure and mark as illustrated.

5
IMG-366537
 

Locate the existing holes under the upholstery.

6
IMG-382592
 

Make a cut in the mat.

7
IMG-362461
 

Use the tool provided to cut hole.

Drill first layer only

8
IMG-362466
 

Note!
Orientation view

9
IMG-372305
 


Use special tool: T9512782, Rivet nut tool

Adjust to the specified value.

10
IMG-367096
 
11
IMG-367098
 

The outermost thread of the tool should be flush with the rivet nut end.

12
IMG-367139
 
13
IMG-367307
 

Press the tool against the surface.

Hold the tool at right angles to the surface.

Tighten to the value stated.

 

Check

14
IMG-367354
 

Measure

Use: Vernier caliper

 

Accessory installation

15
 

Install rivet nut in the other location.

16
IMG-362481
 
17
IMG-362483
 

Install the screws.

18
IMG-362484
 

Note!
Only use moderate force.

Tighten the bolts.

 

Removal

19
IMG-355927
 
 

Accessory installation

20
IMG-362447
 

Measure and mark as illustrated.

21
IMG-366542
 

Locate the existing holes under the upholstery.

22
IMG-382591
 

Make a cut in the mat.

23
IMG-362460
 

Use the tool provided to cut hole.

24
IMG-362467
 

Note!
Orientation view

25
IMG-372305
 


Use special tool: T9512782, Rivet nut tool

Adjust to the specified value.

26
IMG-367096
 
27
IMG-367098
 

The outermost thread of the tool should be flush with the rivet nut end.

28
IMG-367337
 
29
IMG-367336
 

Press the tool against the surface.

Hold the tool at right angles to the surface.

Tighten to the value stated.

 

Check

30
IMG-367354
 

Measure

Use: Vernier caliper

 

Accessory installation

31
IMG-362487
 
32
IMG-362493
 

Install the screws.

33
IMG-362494
 

Note!
Only use moderate force.

Tighten the bolts.