2017 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2017
XC60 (-17) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313593671.231373767, 31373457, 31359354, 31373455, 31359366, 31373458
Skid plate, rear bumper




IMG-374691




Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-345497
IMG-239660
IMG-239940
IMG-239944

IMG-375493


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Applies to unpainted component

3
IMG-377406
 
4
IMG-377315
 

Caution!
First the paint must dry after painting.

Clean the surface.

Use: 1161721, Isopropanol

5
IMG-377469
 

Remove the protective film.

6
IMG-377467
 

Install component that comes with the accessory kit.

 

Removal

7
IMG-374748
 

Remove the clips.

Use: Drift

Remove the screws.

8
IMG-376953
 

Remove the screws.

Loosen the component indicated. Do not remove it.

On both sides.

9
IMG-376937
 

Remove the screws.

Remove the clip.

On both sides.

10
IMG-376950
 

Remove the part carefully

Remove the panel.

On both sides.

Use: Interior trim remover

11
IMG-376844
 

Use: Interior trim remover

12
IMG-374759
 

The part is not to be reused.

 

Accessory installation

13
IMG-374767
 

Note!
Orientation view

Note the position.

On both sides.

14
IMG-375271
 

Remove the protective film.

15
IMG-374768
 

Note!
Note the position.

On both sides.

16
IMG-375495
 

Note!
Note the position.

Install the clips as illustrated.

17
IMG-374769
 

Note!
Ensure that the tape is fixed to the surface.

Locate the markings for the positions.

Drill the holes.

18
IMG-375497
 

Use: Pop rivet pliers

 

Vehicles with fixed towbar

19
IMG-375518
 
 

Vehicles with detachable towbar

20
IMG-375517
 
21
IMG-376894
 
22
IMG-376899
 
23
IMG-376900
 
24
IMG-376903
 
 

Vehicles with towbar, Hitch

25
IMG-375516
 
 

All vehicles

26
IMG-376845
 

Fold the protective film forward

27
IMG-376961
 

Clean the surface.

Use: 1161721, Isopropanol

28
IMG-374899
 
29
IMG-374898
 
30
IMG-376850
 

Remove the protective film.


Hint
Press and apply pressure to the part over the tape for at least 20 seconds.

31
IMG-376865
 

Install component that comes with the accessory kit.

 

Installation

32
 

Reinstall the removed parts in reverse order.