Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2019
XC60 (18-) 2019

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314359731.131435972
Bumper cover




 

Materials

Designation

Part number

Isopropanol

Masking tape


Equipment
IMG-345497
IMG-397698

IMG-407105


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

When installing, the car must retain a temperature of 20 degrees C.

After installation, the car must not be washed for 48 hours

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Preparation

4
IMG-420155
 

Open the tailgate.

5
IMG-412008
 

Clean the surface.

6
IMG-412005
 

Wipe off

Use: , Isopropanol

Allow to dry.

 

Accessory installation

7
IMG-412021
 

Remove the marked part.

8
IMG-412293
 

Fold the protective film forward

9
IMG-432226
 

Use suitable tape to indicate the center.

10
IMG-412296
 
  1. Use: , Masking tape

  2. Mark the centre.

11
IMG-412301
 

Install component that comes with the accessory kit.

Place the component where indicated in the graphic.

Measure

Use: Vernier caliper

12
IMG-412376
 

Note!
Note the position.

Allow the Bumper Protection to adhere to the Bumper Cover as indicated.

Use: , Masking tape

13
IMG-432214
 

Note!
Note the position.

Remove the protective film.

14
IMG-412391
 

Thoroughly press, by hand, all over the Bumper Protection to make it cling properly.

15
IMG-432202
 

Remove the tape.