Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2012
XC90 (03-) 2012

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
86244931.130721723, 30721724, 30721722
Protective grille, steel, second row of seats




R8902546




 

R8902513


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

  

Note!

Remove the front of the cargo compartment cover when using together with a cargo compartment safety grille. This will prevent any rattling. See point 1-4.


 

Preparations cargo compartment cover

1
R8504424
 

Preparations cargo compartment cover

    Applies to cars with a cargo compartment cover

  • Remove the cargo compartment cover from the car

  • Carefully pry out both the rubber edgings on the front short section of the cargo compartment cover. Use a small screwdriver. Remove the rubber edgings

  • Remove the steel edging inside the rubber edgings (if they did not come off when the rubber edgings were removed).

2
R8504425
 

    Applies to cars with cargo compartment covers with Allen screws on the sides

  • Remove the Allen screws (1.3 mm), or ordinary screws, on one edge of the front of the cargo compartment cover.

3
R8504426
 

    Applies to cars with cargo compartment covers with screws on the underside

  • Remove both the screws from the underside of the front of the cargo compartment cover.

4A
R8504427
4B
R8504428
 

Illustration A

  • Pull the front section of the cargo compartment cover from the channel in the rear section and put it to one side.

Illustration B

The cargo compartment cover without its front section will be reinstalled in point 7.

 

Installing the cargo compartment safety grille

5
R8902547
 

Installing the cargo compartment safety grille

  • Detach the mounting, knob and cap from each other.

6
R8902514
 

  • Lift the cargo compartment safety grille in through the tailgate or through one of the rear doors (fold down the second row of seats if using one of the rear doors)

  • Insert one mounting for the cargo compartment safety grille into the corresponding mounting above the rear door behind the second row of seats

  • Position the cargo compartment safety grille mounting in the front position in the other mounting

  • Position the other mounting for the cargo compartment safety grille over the other rear door and move it into the front position.

7
R8902548
 

  • Insert the mounting bracket from underneath through the lower mounting in the cargo compartment safety grille as illustrated. Screw on the knob

  • Secure the mounting bracket hook in the load securing eyelet. Tighten the knob until the mounting bracket engages the load securing eyelet

  • Repeat the operation on the other side

  • Tighten both the mounting brackets alternately

  • Install the protective caps on the threads above the knobs

  • Reinstall the cargo compartment cover.


Warning!

Applies to cars with three rows of seats: The third row of seats must be folded down when the cargo compartment safety grille is installed. It is prohibited to sit in the cargo compartment behind a cargo compartment safety grille during a journey.