Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2020
XC60 (18-) 2020 L.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314548861.032286630, 32259556, 30795574, 31454885
Parking assistance, camera, rear




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46

 

981 4199 Torque wrench

Tool number:981 4199

Tool description:Torque wrench

Tool boards:08


Materials

Designation

Part number

Cable tie, 750 mm

988734

Electrical tape

Lubricant

1161150


Equipment
A0000162
IMG-239664
IMG-239667

IMG-428591


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Preparation

4
IMG-426135
 
 

Removal

5
 

Note!
The removal steps may contain installation details.

6
IMG-383769
 

Note!
The graphic shows the back of the component before removal.

7
IMG-412247
 

Note!
Perform the procedure one side at a time.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Disconnect the connector.

8
IMG-414590
 

Remove the panel.

9
IMG-412242
 

Remove the panel.

Disconnect the connector, if applicable.

10
IMG-414575
 

Remove the panel.

11
IMG-414580
 

Remove the panel.

Disconnect the connector, if applicable.

12
IMG-414585
 

Remove the screws.

Remove the panel.

13
IMG-422101
 
14
IMG-414614
 

Remove the panel.

15
IMG-414995
 
16
IMG-415046
 

Note!
The graphic shows the back of the component before removal.

17
IMG-415047
 

Remove the panel.

Use hands only.

18
IMG-415049
 

Release the catch.

Remove the marked part.

19
IMG-418522
 

Remove the panel.

Use hands only.

20
IMG-417443
 
21
IMG-417446
 
22
IMG-414411
 

Release the lock.

Repeat on the other side.

Remove the marked part.

23
IMG-414483
 

Remove the panel.

Disconnect the connector, if applicable.

24
IMG-422120
 

Caution!
Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor!

25
IMG-422101
 
26
IMG-426990
 
27
IMG-397280
 

Remove the marked part.

28
IMG-397244
 

Detach the panel.

29
IMG-397247
 

Remove the panel.

30
IMG-383130
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

31
IMG-426991
 
32
IMG-414515
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

33
IMG-383134
 
34
IMG-396605
 

Disconnect the connector.

35
IMG-396606
 

Unhook the cable harness clips.

36
IMG-427010
 
37
IMG-416201
 

Remove the screws.

Fold marked part aside.

38
IMG-415092
 

Remove the marked part.

39
IMG-427190
 

Remove the marked part.

 

Right-hand drive vehicles

40
IMG-394096
 

Remove the marked part.

The part is to be reused.

41
IMG-394081
 

Remove the screw.

Remove the marked part.

42
IMG-394105
 

Remove the marked part.

43
IMG-394078
 

Disconnect the connector.

44
IMG-426665
 

Remove the marked part.

 

All vehicles

45
IMG-425287
 
46
IMG-414611
 

Remove the marked part.

47
IMG-415830
 

Repeat on the other side.

48
IMG-415831
 

Remove the screw.


Tightening torque: M6 , 10 Nm

Repeat on the other side.

49
IMG-425226
 
50
IMG-425291
 

Remove the screws.

51
IMG-425295
 

Remove the marked part.

52
IMG-427005
 

Disconnect the connectors.

Remove the panel.

53
IMG-427015
 

Remove the screws.

54
IMG-427020
 

Note!
The graphic shows the back of the component before removal.

55
IMG-427025
 

Remove the panel.

56
IMG-427820
 

Detach the panel.

57
IMG-427821
 

Remove the marked part.

58
IMG-427826
 
59
IMG-427827
 

The graphic shows the back of the component.

60
IMG-427830
 

Remove the marked part.

61
IMG-418641
 

Disconnect the connector.

62
IMG-418643
 

Loosen the screws.

Loosen the exact number of turns indicated in the image.

63
IMG-418645
 

Use: Interior trim remover

The part is not to be reused.

 

Accessory installation

64
IMG-426635
 
65
IMG-419877
 
66
IMG-418648
 

Tighten the bolts.


Use special tool: T9814199, Torque wrench

67
IMG-418642
 

Connect the connector.

68
IMG-418825
 

Loosen the marked detail/details.

To be repeated in the other end of the component.

69
IMG-418831
 

Release the catches.

Loosen the marked detail/details.

Use: Scribe

Use: Interior trim remover

To be repeated in the other end of the component.

70
IMG-419675
 

Use: 988734, Cable tie, 750 mm

71
IMG-419680
 

Use: , Electrical tape

72
IMG-426796
 
73
IMG-427030
 

Pull the wiring through.

 

Vehicles with power liftgate

74
IMG-427890
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

 

Applies to all other vehicles

75
IMG-429685
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

76
IMG-419805
 

Pull the wiring through.

Use: 1161150, Lubricant

Wipe off

Remove the cable tie(s).

77
IMG-419818
 

Pull the wiring through.

78
IMG-418850
 

Reinstall the removed part.

To be repeated in the other end of the component.

79
IMG-418841
 

Caution!
Make sure that the rubber grommet seals properly to the body.

Reinstall the removed part.

To be repeated in the other end of the component.

80
IMG-427940
 

Caution!
Ensure that the wire or wiring harness cannot rub against adjacent components.

Install the cable.

Use a cable tie

81
IMG-427775
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

82
IMG-427770
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

83
IMG-415163
 

Connect the prerouted cable.

84
IMG-427771
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

 

Right-hand drive vehicles

85
IMG-427805
 
 

All vehicles

86
IMG-427772
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

87
IMG-427110
 

Fold marked part aside.

88
IMG-426585
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

89
IMG-427132
 

Position/route the cable as illustrated.

Install the cable.

90
IMG-428428
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

91
IMG-427762
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

92
IMG-427760
 

Position the cable harness excess as illustrated.

Install the cable.

Use a cable tie

93
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

 

Installation

94
IMG-400000
 

Reinstall the removed parts in reverse order.