Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Accessory installation

Clean the surface.

Right-hand drive vehicles

Hook the pedal rubber onto the long side of the accelerator pedal.

Press the pedal rubber towards the pedal and at the same time fold the pedal rubber's profile over the pedal using a straightening tool.

Cars with automatic transmissions

The part is not to be reused.

Hook the pedal rubber onto the pedal at the lower edge and pull the pedal rubber upward.

Press the pedal rubber towards the pedal and at the same time fold the pedal rubber's profile over the pedal using a straightening tool.

Cars with manual transmissions

The part is not to be reused.

Hook the pedal rubber onto the pedal at the lower edge and pull the pedal rubber upward.

Press the pedal rubber towards the pedal and at the same time fold the pedal rubber's profile over the pedal using a straightening tool.

Left hand drive vehicles

Repeat method steps for the clutch pedal.

Right-hand drive vehicles

The part is not to be reused.

Hook the pedal rubber onto the pedal at the lower edge and pull the pedal rubber upward.

Press the pedal rubber towards the pedal and at the same time fold the pedal rubber's profile over the pedal using a straightening tool.