Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2017
V60 (-18) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314082481.031373092
Parking assistance, front, R-design




 

Materials

Designation

Part number

Electrical tape


Equipment
IMG-242205
A0000162

IMG-379148

IMG-379111


 
  
36630-2

Parking assistance, front, R-design

 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

These installation instructions show installation on left hand drive cars.

When installing on right-hand drive cars, perform the procedures on the opposite side and/or mirrored.

Where the procedure differs, the right-hand version is also shown with text and image.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-332193
 

Set the ignition key to position 0.

5
IMG-340600
 

Remove the panel.

6
IMG-344926
 
7
IMG-344927
 

Remove the weatherstrip.

8
IMG-344928
 
9
IMG-344929
 
10
IMG-344930
 
11
IMG-344451
 
12
IMG-269484
 

Fold the carpet to the side.

13
IMG-307603
 

Locate the rubber grommet under the insulation and press it out.

14
IMG-342372
 

Repeat on the other side.

15
IMG-341902
 

Disconnect the connector, if applicable.

Repeat on the other side.

16
IMG-360124
 
17
IMG-341906
 

Remove the panel.

18
IMG-307605
 

Remove the weatherstrips.

19
IMG-307606
 

Detach the panel.

20
IMG-307607
 

Detach the panel.

21
IMG-346181
 
22
IMG-343412
 
23
IMG-343413
 
24
IMG-341912
 

Turn the wheel inwards.

25
IMG-341913
 

Remove the screws.

 

Vehicles with headlamp washers

26
IMG-341914
 

Fold the wing liner to one side.

27
IMG-341915
 

Warning!
Be prepared to collect escaping fluid.


  1. Note!
    Tape the hose high up on the washer fluid reservoir to prevent washer fluid from coming out.

  2. Take a piece of washer hose. Tie a knot in it and place it on the washer pump to prevent the washer fluid reservoir from emptying.

 

All vehicles

28
IMG-341916
 

Turn the wheel inwards.

29
IMG-341917
 

Remove the screws.

30
IMG-341918
 

Fold the wing liner to one side.

31
IMG-378274
 

Locate the connector.

32
IMG-378285
 
  1. Depress the locking device.

  2. Disconnect the connector.

33
IMG-307687
 

RHD: The procedure is carried out on the opposite side.

34
IMG-307688
 

RHD: The procedure is carried out on the opposite side.

35
IMG-341924
 
36
IMG-341927
 

Remove the clips.

37
IMG-341931
 

Remove the clips.

Remove the screws.

38
IMG-341932
 
39
IMG-379127
 

Remove the screws.

40
IMG-379126
 

Remove the clips.

41
IMG-379129
 

Repeat on the other side.

42
IMG-379128
 

Caution!
Place the Bumper Cover on a suitable surface.

43
IMG-379104
 

Disconnect the connector.

Repeat on the other side.

44
IMG-379105
 

Release the catches.

Remove the panel.

Repeat on the other side.

45
IMG-379107
 

Release the catches.

Remove the panel.

The part is not to be reused.

Repeat on the other side.

 

Accessory installation

46
IMG-379113
 
47
IMG-379109
 

Repeat on the other side.

48
IMG-379117
 

Reinstall the removed part.

49
IMG-379116
 

Connect the connector.

50
IMG-379115
 
51
IMG-379114
 

Repeat on the other side.

52
IMG-379118
 

Put the wiring in the Bumper cover without installing the wiring.

RHD: The cable harness is positioned mirrored.

53
IMG-379119
 

Connect the connectors.

54
IMG-379123
 
55
IMG-379121
 
56
IMG-379120
 

Attach the connector to the wiring harness.

The connector is not to be used.

Repeat on the other side.

57
IMG-379122
 
 

Left hand drive vehicles

58
IMG-373258
 

Use: , Electrical tape

59
IMG-378253
 
60
IMG-307882
 
 

Right-hand drive vehicles

61
IMG-373258
 

Use: , Electrical tape

62
IMG-341962
 
63
IMG-341963
 
 

All vehicles

64
IMG-379130
 

Place the Bumper Cover in position for installation.

 

Left hand drive vehicles

65
IMG-378276
 

Connect the connectors.

 

Right-hand drive vehicles

66
IMG-378280
 

Connect the connector.

67
IMG-378611
 

Connect the connector.

 

Vehicles with headlamp washers

68
IMG-350323
 

Reinstall the removed parts in reverse order.

 

All vehicles

69
IMG-379130
 

Reinstall the bumper.

 

Left hand drive vehicles

70
IMG-307909
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.

Route the cable harness to the existing cable harness.

Reinstall the headlamp.

71
IMG-273585
 
72
IMG-273586
 

Remove the nuts.

73
IMG-378517
 
74
IMG-378516
 

Pull the wiring through.

75
IMG-273588
 

Install the cable.

 

Right-hand drive vehicles

76
IMG-273585
 
77
IMG-307910
 
78
IMG-307911
 

Install the cable.

79
IMG-307912
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.

80
IMG-307913
 
81
IMG-307914
 
 

All vehicles

82
IMG-345879
 

Note!
Orientation view


Note!
On some markets the rubber grommet may be covered by the heat shield.

83
IMG-372722
 
84
IMG-373255
 
85
IMG-377675
 

Pull the wiring through.

86
IMG-373254
 
87
IMG-340544
 

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

88
IMG-377674
 
 

Right-hand drive vehicles

89
IMG-308083
 
 

All vehicles

90
IMG-308084
 
91
IMG-346331
 
 

Left hand drive vehicles

92
IMG-361341
 

Connect the cable harness terminals in the connector as follows.

 

Right-hand drive vehicles

93
IMG-361342
 

Connect the cable harness terminals in the connector as follows.

 

All vehicles

94
IMG-361376
 
95
IMG-361377
 
96
IMG-378052
 

Disconnect the connector, if applicable.

Attach the connector to the wiring harness.

Use: , Electrical tape

The connector is not to be used.

97
IMG-378055
 

Disconnect the connectors.

98
IMG-378062
 

The part is not to be reused.

99
IMG-378063
 

Install component that comes with the accessory kit.

100
IMG-378065
 

Connect the connectors.

101
IMG-378066
 

Connect the prerouted cable.

102
IMG-378070
 

Note!
Extra cable length must be secured using cable ties.

103
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31266964

104
IMG-377070
 

Reinstall the removed parts in reverse order.