2018 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC40 2018
L.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322040071.132288119
Steering wheel leather heated




Equipment
IMG-345497
IMG-239664

IMG-450006

IMG-462079


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

3
IMG-461977
 

Remove the marked part.

4
IMG-462002
 

Remove the screw.

Remove the marked part.

5
IMG-461990
 

Remove the marked part.

6
IMG-461994
 

Remove the marked part.

7
IMG-461957
 
8
IMG-461961
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

9
IMG-461958
 
10
IMG-461960
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

11
IMG-462292
 

Note!
Make sure that the steering column lock is not engaged.

Turn on the ignition.

12
IMG-400002
 

Remove the battery's negative cable.

13
IMG-461804
 
14
IMG-449569
 
15
IMG-449570
 
16
IMG-462266
 

Caution!
Make sure to protect adjacent surfaces or components.

17
IMG-449571
 
18
IMG-449573
 
19
IMG-449574
 
  1. Release the catch.

  2. Loosen the marked detail.

20
IMG-450005
 
21
IMG-449745
 
22
IMG-449577
 
23
IMG-449579
 
  1. Release the catch.

  2. Loosen the marked detail.

24
IMG-449580
 

Turn the steering wheel into neutral position.

25
IMG-449582
 

Warning!
When temporarily storing a pyrotechnical component, it must always be positioned with its active part (e.g. air bag front or equivalent) facing up.

Release the connector's catch.

Use: Electrician's screwdriver

Disconnect the connector.

Remove the marked part.

26
IMG-449866
 

Disconnect the connector.

27
IMG-462181
 

Remove the screw.

Remove the marked part.

28
IMG-449970
 

Note!
The graphic shows the back of the component before removal.

29
IMG-449977
 

Release the catches.

Use: Electrician's screwdriver

Loosen the marked detail.

30
IMG-449978
 

Remove the marked detail/details.

Use: Electrician's screwdriver

31
IMG-449990
 

Remove the screws.

32
IMG-461966
 
33
IMG-461971
 
34
IMG-449991
 

Remove the screw.

Remove the marked part.

35
IMG-449775
 

Disconnect the connectors.

Remove the cable harness clips.

36
IMG-450001
 

Remove the screw.

37
IMG-434948
 

Release the catch.

Remove the marked part.

 

Accessory installation

38
IMG-449995
 

Caution!
Take extra care when handling the component.

Install component that comes with the accessory kit.

39
IMG-450002
 

Tighten the screw.


Tightening torque: Steering wheel module, to Steering column , 6 Nm

40
IMG-462267
 

Caution!
Observe caution when carrying out this step.

41
IMG-461918
 

Note!
Orientation view

42
IMG-462356
 

Release the connector's secondary lock.

Lift approximately 2 mm.

43
IMG-461913
 

Install component that comes with the accessory kit.

Depress the secondary lock.

44
IMG-461931
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

45
IMG-450003
 

Reinstall the removed parts in reverse order.

46
IMG-461999
 

Position/route the cable harness as illustrated.

Install the wiring harness.

Use a cable tie

47
IMG-462001
 

Put the tape around the cable.

48
IMG-462004
 

Position/route the cable harness as illustrated.

49
IMG-462014
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

50
IMG-462029
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

51
IMG-462042
 

Remove the nut.

Connect the ground cable.

Install the nut.


Tightening torque: M6 , 10 Nm

52
IMG-462044
 

Release the catch.

Remove the marked part.

53
IMG-462045
 

Remove the marked detail/details.

54
IMG-462046
 

Remove the nuts.

55
IMG-462268
 

Remove the cable tie(s).

56
IMG-462061
 
57
IMG-462064
 

Release the catches.

Remove the marked part.

58
IMG-462073
 

Connect the prerouted cable.

59
IMG-462271
 

Install component that comes with the accessory kit.

60
IMG-462283
 

Reinstall the removed parts in reverse order.

Place the cable tie as illustrated.

61
IMG-462284
 

Reinstall the removed parts in reverse order.

62
IMG-462290
 

Route the cable harness to the existing cable harness.

Position the cable harness excess as illustrated.

Install the wiring harness.

Use a cable tie

 

Installation

63
IMG-462285
 
64
IMG-450004
 

Install the marked component.

Reinstall the screw.

65
IMG-433661
 

Install the marked component.

66
IMG-462082
 

Reinstall the removed parts in reverse order.

 

Removal

67
IMG-436995
 

Note!
The graphic shows the back of the component before removal.

68
IMG-437033
 

Repeat on the other side.

69
IMG-437034
 

Repeat on the other side.

70
IMG-437176
 

Remove the marked part.

71
IMG-461777
 

Disconnect the connectors.

Repeat on the other side.

72
IMG-449800
 

Remove the screw.

The item is to be reused.

 

Accessory installation

73
IMG-449870
 

Note!
Press the wire into the grove to secure it.

Assemble components that come with the accessory kit.

74
IMG-449925
 

Ground connection

Position/route the cable as illustrated.

Install the screw.

75
IMG-461778
 

Connect the connectors.

Repeat on the other side.

76
IMG-449875
 
77
IMG-449869
 

Note!
The markings must be opposite each other.

Install the marked component.

78
IMG-449935
 

Install component that comes with the accessory kit.


Tightening torque: Steering wheel to steering column (center screw) , 60 Nm

 

Installation

79
IMG-449867
 

Connect the connectors.

80
IMG-462293
 

Caution!
Ensure that the wiring harness is correctly positioned and pressed into the grooves.

81
IMG-449583
 

Warning!
Make sure that the component has locked properly in position by pulling it towards you.

Connect the connector.

Install the marked component.

82
IMG-400000
 

Reinstall the removed parts in reverse order.

83
IMG-400003
 

Reinstall the battery's negative cable.


Tightening torque: Battery cable for battery , 6 Nm

84
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 32204568