Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V70 2014
V70 (08-) 2014

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314703581.232270870, 32270871
Digital radio, DAB




IMG-394921




 
Equipment
IMG-242205
IMG-345497
IMG-239664

IMG-394782


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

3
IMG-332193
 

Set the ignition key to position 0.

 

Removal

4
IMG-395390
 
5
IMG-395396
 
6
IMG-395422
 

Remove the marked part.

7
IMG-395427
 
8
IMG-395409
 
 

Accessory installation

9
IMG-394788
 

Install component that comes with the accessory kit.

10
IMG-394790
 

Install component that comes with the accessory kit.

Install the screws.

11
IMG-342320
 
12
IMG-342321
 

Tighten the screw.


Tightening torque: M6 , 10 Nm

13
IMG-394806
 

Install component that comes with the accessory kit.

Fasten the wiring harness using the existing clips.

14
IMG-395171
 

Locate the pre-routed connectors.

Connect the connectors.

 

Installation

15
IMG-395755
 
16
IMG-395756
 
17
IMG-395760
 
18
IMG-242268
 

Note!
First, download the software for preparatory installation according to the accessory catalogue. Then do the download/reload of software for the accessory function.


Note!
When doing an aftermarket installation of DAB or DAB+, it is necessary to carry out a DAB application download.


Note!
When upgrading from DAB to DAB+, a DAB re-load is necessary.

Carry out a download, or a re-load, of accessory function software by following VIDA service information.