Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC70 2014
XC70 (08-) 2014

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314082461.031373081
Parking assistance, front




 

Materials

Designation

Part number

Electrical tape


Equipment
IMG-242205
A0000162

IMG-379943

IMG-379028


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

These installation instructions show installation on left hand drive cars.

When installing on right-hand drive cars, perform the procedures on the opposite side and/or mirrored.

Where the procedure differs, the right-hand version is also shown with text and image.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-292826
 
5
IMG-354313
 

Remove the panel.

6
IMG-354315
 

Remove the weatherstrip.

7
IMG-354318
 

Caution!
The front and upper sill panel must be removed and installed as one unit.

8
IMG-354319
 

Detach the panel.

9
IMG-344930
 

Remove the panel.

10
IMG-354320
 

Remove the panel.

11
IMG-355521
 

Remove the screws.

Detach the panel.

12
IMG-355519
 

Disconnect the connector.

Remove the panel.

13
IMG-352187
 

Fold the carpet to the side.

14
IMG-353339
 

Locate the rubber grommet under the insulation and press it out.

 

Vehicles with integrated child safety seat

15
IMG-319024
 
16
IMG-319025
 
 

All vehicles

17
IMG-249173
 
18
IMG-249174
 

Remove the panel.

19
IMG-307605
 

Remove the weatherstrips.

20
IMG-378526
 

Detach the panel.

21
IMG-249176
 
22
IMG-273525
 
23
IMG-273526
 
24
IMG-268004
 
25
IMG-268005
 
26
IMG-273316
 
27
IMG-307623
 

Turn the wheel inwards.

28
IMG-379973
 
 

Vehicles with headlamp washers

29
IMG-379975
 

Fold the wing liner to one side.

30
IMG-378537
 

Place a container under the car.

Take a piece of washer hose. Tie a knot in it and place it on the washer pump to prevent the washer fluid reservoir from emptying.

Release the lock.

Remove the hose.

 

All vehicles

31
IMG-307627
 

Turn the wheel inwards.

32
IMG-379974
 

Remove the screws.

33
IMG-379976
 

Fold the wing liner to one side.

34
IMG-380014
 

Disconnect the connector, if applicable.

35
IMG-379376
 

Release the connector's catch.

Disconnect the connector.

36
IMG-379977
 

Open the hood.

37
IMG-379978
 

RHD: The procedure is carried out on the opposite side.

38
IMG-379979
 

RHD: The procedure is carried out on the opposite side.

39
IMG-353381
 

Disconnect the connector.

40
IMG-379980
 

Raise the car.

Remove the screws.

41
IMG-377609
 

Remove the clips.

Remove the screws.

42
IMG-379983
 

Remove the clips.

43
IMG-379986
 
44
IMG-379987
 

Caution!
Do not pull the outermost corner of the bumper cover. Risk of deformation.

Repeat on the other side.

45
IMG-379988
 

Repeat on the other side.

46
IMG-379991
 

Caution!
Place the Bumper Cover on a suitable surface.

Request the aid of a colleague for this procedure.

Disconnect the connector for the fog lamp.

47
IMG-379992
 

Release the catches.

Repeat on the other side.

48
IMG-379993
 

The part is not to be reused.

49
IMG-379024
 

The part is not to be reused.

 

Accessory installation

50
IMG-379025
 
51
IMG-379997
 

Repeat on the other side.

52
IMG-379994
 
53
IMG-379996
 
54
IMG-379999
 

Put the wiring in the Bumper cover without installing the wiring.

RHD: The cable harness is positioned mirrored.

55
IMG-380016
 

Repeat on the other side.

56
IMG-380017
 

Repeat on the other side.

57
IMG-380018
 

Repeat on the other side.

58
IMG-380010
 
59
IMG-378325
 

Use: , Electrical tape

60
IMG-379484
 
 

Left hand drive vehicles

61
IMG-379467
 
62
IMG-379477
 
63
IMG-379479
 
64
IMG-273585
 
65
IMG-273586
 

Remove the nuts.

66
IMG-378517
 
67
IMG-378516
 

Pull the wiring through.

68
IMG-273588
 

Install the cable.

 

Right-hand drive vehicles

69
IMG-379480
 
70
IMG-307910
 
71
IMG-307911
 
72
IMG-273585
 
73
IMG-307912
 
74
IMG-307913
 
75
IMG-307914
 
 

All vehicles

76
IMG-345879
 

Note!
Orientation view


Note!
On some markets the rubber grommet may be covered by the heat shield.

77
IMG-377670
 
78
IMG-377675
 

Pull the wiring through.

79
IMG-340544
 

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

 

Left hand drive vehicles

80
IMG-377671
 

Remove the tape.

Release the connector's secondary lock.

Connect the pre-routed cables to the 6-pin connector.

Depress the secondary lock.

 

Right-hand drive vehicles

81
IMG-377672
 

Remove the tape.

Release the connector's secondary lock.

Connect the pre-routed cables to the 6-pin connector.

Depress the secondary lock.

 

All vehicles

82
IMG-377673
 
83
IMG-249181
 
84
IMG-377674
 
 

Right-hand drive vehicles

85
IMG-358746
 

Fold the insulation to one side.

86
IMG-308083
 
 

All vehicles

87
IMG-273591
 

Pull the wiring through.

88
IMG-273592
 

Pull the wiring through.

89
IMG-378483
 

Note!
Orientation view

90
IMG-378481
 
91
IMG-378475
 

Disconnect the connector, if applicable.

Attach the connector to the wiring harness.

Use: , Electrical tape

The connector is not to be used.

92
IMG-378477
 

Disconnect the connectors.

The part is not to be reused.

93
IMG-378479
 

Install component that comes with the accessory kit.

94
IMG-378480
 

Connect the connectors.

95
IMG-378482
 
96
IMG-378485
 

Attach any excess wire to the wiring harness.

 

Installation

97
IMG-380142
 

Place the Bumper Cover in position for installation.

Connect the connectors.

98
IMG-380023
 

Connect the connector.

99
IMG-380024
 
100
IMG-377070
 

Reinstall the removed parts in reverse order.

101
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 30765568