Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V70 2016
V70 (08-) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314142831.039825257, 39825262, 39825263, 39825264, 39825254, 39825255, 39825256, 39825253
Multimedia system, RSE, two screens, with two players




 

Materials

Designation

Part number

Cable tie, 750 mm

988734

Electrical tape


Equipment
IMG-345497
IMG-239664

IMG-382160

IMG-382908


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332194
 

Set the ignition key to position I.

4
IMG-372558
 

Adjust to the lowermost position.

Repeat on the other side.

5
IMG-372559
 

Adjust the seat to center position so that the seat fastening bolts can be removed.

Repeat on the other side.

6
IMG-332179
 
  1. Set the ignition key to position 0.

  2. Remove the battery's negative cable.

7
IMG-329148
 
8
IMG-340979
 
9
IMG-340980
 

Remove the screws.

10
IMG-303005
 
11
IMG-303006
 

Remove the screws.

 

Alternative 1

12
IMG-380657
 
 

Alternative 2

13
IMG-380655
 
14
IMG-380656
 
 

All vehicles

15
IMG-329151
 
16
IMG-373198
 

Note!
Orientation view

17
IMG-329209
 

Remove the screws.

Disconnect the connector.

18
IMG-329153
 

Caution!
Be extra careful when removing or installing this component.

19
IMG-358761
 

Use: Electrician's screwdriver

20
IMG-358762
 
21
IMG-377070
 

Repeat the steps when removing on opposite side.

 

Accessory installation

22
IMG-382958
 

Thread the cable tie from the head restraint's inner mounting.

Route the cable tie inside the backrest between the upholstery's thin foam and the impact protection.

Use: 988734, Cable tie, 750 mm

23
IMG-380827
 

Place the component where indicated in the graphic.

24
IMG-379510
 
25
IMG-379514
 

Use: , Electrical tape

26
IMG-382967
 

Pull the wiring through.

27
IMG-382074
 

Pull the wiring through.

28
IMG-380828
 

The cables must be positioned in front of the head restraint's tube.

29
IMG-380829
 

Pull the wiring through.

Remove the tape.

30
IMG-380830
 

Caution!
Check that the component has locked in its bottom position.

31
IMG-262956
 

The image shows seat without upholstery.

Using your fingers, push the cable harness under the protective pad. After installation, the cable harness must not appear under the upholstery.

  1. padding

  2. Protective pad

32
IMG-373320
 

Caution!
Make sure that no part of the wiring harness is trapped.

Route the cable harness to the existing cable harness.

Install the cable.

33
IMG-373201
 

Note!
Orientation view

34
IMG-373200
 

Note!
The graphic shows the back of the component before removal.

35
IMG-373202
 

Remove the screw.

36
IMG-373206
 
37
IMG-380695
 

Note!
Extra cable length must be secured using cable ties.

Install the cable.

38
IMG-377070
 

Repeat the steps when installing accessories on opposite side.

 

Removal

39
IMG-341878
 

Remove the panel.

40
IMG-384963
 

Remove the panel.

41
IMG-347139
 

Remove the panel.

 

All vehicles

42
IMG-353601
 
43
IMG-353602
 
44
IMG-355469
 
45
IMG-355457
 

Remove the screws.

46
IMG-382341
 
47
IMG-382345
 
48
IMG-352301
 

Remove the screw.

Repeat on the other side.

49
IMG-382450
 

Remove the panel.

50
IMG-382452
 
51
IMG-382453
 
52
IMG-382454
 
53
IMG-382455
 

Remove the screws.

54
IMG-382459
 
55
IMG-382460
 

Disconnect the connector.

56
IMG-382465
 

Disconnect the connector.

 

Accessory installation

57
IMG-382494
 

Install component that comes with the accessory kit.

58
IMG-382510
 

Position/route the cable harness as illustrated.

59
IMG-382512
 

Install the part with butyl tape.

60
IMG-382741
 

Install component that comes with the accessory kit.

61
IMG-379247
 

Install component that comes with the accessory kit.

62
IMG-382746
 
63
IMG-382757
 

Position/route the cable harness as illustrated.

64
IMG-382761
 

Position/route the cable harness as illustrated.

65
IMG-382569
 
66
IMG-382776
 
67
IMG-382778
 

Caution!
Make sure that no part of the wiring harness is trapped.

Reinstall the removed part.

68
IMG-382779
 

Connect the connector.

69
IMG-382781
 

Caution!
Make sure that no part of the wiring harness is trapped.

Reinstall the removed part.

Reinstall the screws.

70
IMG-382788
 

Route the cable marked "Left side" over to the left-hand side.

71
IMG-382791
 

Pull the wiring through.

72
IMG-382793
 

Route the cable harness to the existing cable harness.

73
IMG-382794
 

Fold the carpet to the side.

74
IMG-382802
 
75
IMG-382337
 
76
IMG-382831
 
77
IMG-382832
 
78
IMG-382829
 

Connect the connectors.

79
IMG-382884
 
80
IMG-382858
 
81
IMG-382891
 

Position the cable harness excess as illustrated.

82
IMG-382893
 

Route the cable harness to the existing cable harness.

 

Installation

83
IMG-329473
 

Caution!
Be extra careful when removing or installing this component.

84
IMG-329151
 
85
IMG-380703
 

Connect the cable harness.

86
IMG-372884
 

Note!
Orientation view

87
IMG-380704
 
88
IMG-329270
 

Connect the connector.

Tighten the screw.

89
 

Repeat the steps when installing on opposite side.

90
 

Reinstall the removed parts in reverse order.

91
IMG-382312
 
92
IMG-382311
 
93
 

Place the manual for this accessory in a suitable location in the car.

94
IMG-336901
 

Reinstall the battery's negative cable.

95
IMG-336904
 

Warning!
When switching the ignition on for the first time after a battery disconnect and connect, make sure to stand outside the vehicle and only reach into the vehicle keeping clear of the air bag deployment areas.

96
IMG-382943
 

Set the clock.

97
IMG-275777
 

Adapt the DVD player to the vehicle according to: Product specifications/Design and Function/3 Electrical system/39 Media - communication and entertainment/393 Equipment for entertainment/System for rear seat entertainment/Design