2018 R.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC40 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316506061.632281531, 31650605, 32147651
Parking assistance, camera, rear




Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46


Materials

Designation

Part number

Cable tie, 750 mm

988734

Electrical tape


Equipment
A0000162
IMG-239664
IMG-239667

IMG-454563


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Preparation

4
IMG-430215
 
 

Removal

5
 

Note!
The removal steps may contain installation details.

6
IMG-383769
 

Note!
The graphic shows the back of the component before removal.

7
IMG-431341
 

Note!
Perform the procedure one side at a time.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Disconnect the connector.

8
IMG-431485
 

Remove the panel.

Disconnect the connector, if applicable.

9
IMG-431600
 

Remove the panel.

10
IMG-431605
 

Remove the panel.

Disconnect the connector, if applicable.

11
IMG-431117
 
12
IMG-430999
 

Remove the panel.

13
IMG-431005
 

Remove the screw.


Tightening torque: Seat belt guide, to Bracket , 4.5 Nm

14
IMG-445755
 

Remove the panel.

15
IMG-431100
 

Remove the marked part.

16
IMG-431337
 

Remove the marked part.

17
IMG-434665
 

Remove the marked detail/details.

18
IMG-434666
 

Loosen the screws.


Tightening torque: M6 , 10 Nm

19
IMG-434667
 

Remove the marked part.


Tightening torque: M6 , 10 Nm

20
IMG-431336
 

Disconnect the connectors.

Remove the marked part.

21
IMG-431935
 

Loosen the fastener.

22
IMG-430326
 

Disconnect any connector(s).

Remove the marked part.

23
IMG-431455
 

Remove the panel.

Disconnect the connector, if applicable.

24
IMG-431610
 

Caution!
Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor!

25
IMG-430992
 
26
IMG-431175
 
27
IMG-431460
 

Detach the panel.

28
IMG-431471
 

Remove the panel.

29
IMG-431196
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

30
IMG-431176
 
31
IMG-431197
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

32
IMG-383134
 
33
IMG-396605
 

Disconnect the connector.

34
IMG-396606
 

Unhook the cable harness clips.

35
IMG-427010
 
36
IMG-416201
 

Remove the screws.

Fold marked part aside.


Tightening torque: M6 , 10 Nm

37
IMG-431622
 

Remove the marked part.

38
IMG-431640
 

Remove the marked part.

39
IMG-431652
 

Remove the marked part.

40
IMG-430220
 
41
IMG-430230
 

Remove the part carefully

Repeat the steps when removing on opposite side.

42
IMG-430255
 

Remove the marked part.

43
IMG-387860
 

Detach the panel.

44
IMG-431237
 

Remove the marked part.

45
IMG-431305
 

Remove the marked part.

46
IMG-431275
 

Remove the screw.

Repeat on the other side.

47
IMG-431298
 

Remove the marked part.

Repeat the steps when removing on opposite side.

48
IMG-431297
 

The graphic shows the back of the component.

49
IMG-431240
 

Remove the screws.

50
IMG-431327
 

The graphic shows the back of the component.

51
IMG-431312
 

Remove the marked part.

52
IMG-432355
 

Remove the screws.

53
IMG-432396
 

Remove the marked part.

The part is not to be reused.

54
IMG-432883
 

Disconnect the connector.

55
IMG-438087
 

Remove the clips.

The item is to be reused.

 

Accessory installation

56
IMG-454537
 

Use details according to image.

57
IMG-454548
 

Caution!
Make sure the component is fitted as illustrated.

Press using manual force several times.

58
IMG-454550
 
59
IMG-432945
 

Install the clip(s).

60
IMG-454554
 

Connect the connectors.

61
IMG-432942
 

Install the marked component.

62
IMG-432932
 

Tighten the bolts.

63
IMG-443496
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

64
IMG-443500
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

65
IMG-388168
 

Caution!
Take extra care not to crease the headliner.

66
IMG-397816
 
67
IMG-431835
 

Loosen the marked detail/details.

To be repeated in the other end of the component.

68
IMG-431866
 

Release the catches.

Loosen the marked detail/details.

Use: Scribe

Use: Interior trim remover

To be repeated in the other end of the component.

69
IMG-419675
 

Use: 988734, Cable tie, 750 mm

70
IMG-419680
 

Use: , Electrical tape

71
IMG-432021
 

Pull the wiring through.

72
IMG-432040
 

Pull the wiring through.

73
IMG-388174
 
74
IMG-418850
 

Reinstall the removed part.

To be repeated in the other end of the component.

75
IMG-432875
 

Caution!
Make sure that the rubber grommet seals properly to the body.

Reinstall the removed part.

To be repeated in the other end of the component.

76
IMG-443501
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

77
IMG-443502
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

78
IMG-452252
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

79
IMG-443504
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

80
IMG-443505
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

81
IMG-443506
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

 

Right-hand drive vehicles

82
IMG-432995
 

Remove the marked part.

83
IMG-433050
 

Remove the marked part.

84
IMG-433060
 

Remove the marked part.

85
IMG-433070
 

Remove the screw.

The part is to be reused.


Tightening torque: M6 , 10 Nm

86
IMG-433165
 

Disconnect the connector.

87
IMG-433170
 

Remove the marked part.

88
IMG-443507
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

89
IMG-445018
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

 

Left hand drive vehicles

90
IMG-443508
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

 

All vehicles

91
IMG-432467
 

Connect the prerouted cable.

92
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

 

Installation

93
IMG-400000
 

Reinstall the removed parts in reverse order.

© Volvo Car CorporationParking assistance, camera, rear- 31650606 - V1.6
volvocars.com
Lifestyle Collection
Find a Dealer
South Africa

Cookies Legal Disclaimer Privacy Policy Copyright

Copyright © 2024 Volvo Cars. All rights reserved.