Installation Instructions

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2018
XC60 (18-) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314703181.232310166, 31659889, 31659886
Luggage compartment sill moulding




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46


Equipment
A0000162

IMG-441762


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-440436
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

3
IMG-443146
 
4
IMG-443148
 

Remove the panel.

Use hands only.

5
IMG-443149
 

Remove the screw.

Remove the panel.

6
IMG-443150
 

Release the catch.

Remove the marked part.

7
IMG-430036
 

Remove the panel.

Use hands only.

8
IMG-443200
 
9
IMG-443203
 

Remove the marked part.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

10
IMG-443204
 

Remove the screw.


Tightening torque: Cargo anchor, to body , 24 Nm

11
IMG-425287
 
12
IMG-429316
 
13
IMG-429320
 

Remove the marked part.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

14
IMG-429321
 

Remove the screw.


Tightening torque: Cargo anchor, to body , 24 Nm

15
IMG-421422
 

Remove the marked part.

16
IMG-422386
 
17
IMG-429325
 

Remove the screws.

18
IMG-429326
 

Remove the marked part.

19
IMG-441775
 

Remove the marked part.

Use: Interior trim remover

The part is to be reused.

Repeat on the other side.

20
IMG-443208
 

Remove the panel.

Disconnect the connectors.

21
IMG-443211
 

Remove the screws.

22
IMG-443213
 

Remove the panel.

 

Accessory installation

23
IMG-443219
 

Disconnect the connector.

24
IMG-443227
 

Install component that comes with the accessory kit.

Connect the connectors.

25
IMG-443229
 

Attach the connector to the wiring harness.

26
IMG-443234
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

27
IMG-443263
 

Connect the connector.

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

28
IMG-443240
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

29
IMG-443242
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

30
IMG-443244
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

31
IMG-443264
 

Reinstall the removed part.

Reinstall the screws.

32
IMG-443265
 

Reinstall the removed part.

Connect the connectors.

33
IMG-441776
 

Install the marked component.

Repeat on the other side.

34
IMG-441990
 

Connect the connector.

35
IMG-443260
 

Caution!
Make sure that no part of the wiring harness is trapped.

Install the marked component.

36
IMG-429325
 

Reinstall the screws.

37
IMG-441991
 

Remove the protective film.

38
IMG-442410
 

Remove any traces of glue.

Use a mixture of 50% Volvo concentrated washer fluid and 50% water.

Repeat on the other side.

 

Installation

39
 

Reinstall the removed parts in reverse order.