Installation Instructions

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 2017
V90 (17-) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316504991.031650496
Decor frame




 
Equipment
IMG-345497
IMG-239667
IMG-263203
IMG-239681
IMG-239980
IMG-239664

IMG-417660


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Preparation

3
IMG-417690
 

Open the hood.

 

Removal

4
 

Note!
The removal steps may contain installation details.

5
IMG-412677
 

Remove the clips.

Remove the marked part.

Repeat on the other side.

6
IMG-412680
 

Remove the clip.

Remove the marked part.

7
IMG-412681
 

Remove the screws.

8
IMG-403425
 

Remove the marked part.

Use: Pliers

9
IMG-415975
 

Remove the screws.

Remove the marked part.

10
IMG-412692
 

Remove the clips.

Remove the screws.

11
IMG-412697
 

Remove the nut.

12
IMG-412710
 

Fold the wing liner to one side.

13
IMG-412730
 

Caution!
The number of connectors, cables and cable ties may vary depending on the vehicle specification.

Disconnect the connectors.

14
IMG-412715
 

Remove the screws.


Tightening torque: Bracket to front fender , 6 Nm

15
 

Repeat the steps when removing on opposite side.

 

Vehicles with headlamp washers

16
IMG-412745
 

Release the lock.

Undo the hose from the connection.

17
IMG-412750
 

Release the lock.

Undo the hose from the connection.

Repeat on the other side.

 

All vehicles

18
IMG-412779
 

Remove the screws.

Remove the clip.

Fold marked part to one side.

19
IMG-412725
 

Remove the clips.

Use: Pliers

20
IMG-412771
 

Caution!
Place the component on a suitable underlay or support.


Note!
This step requires the aid of another technician.

Release the catches.

Remove the part carefully

Remove the marked part.

 

Vehicles with parking assistance

21
IMG-413132
 

Remove the part carefully

Fold marked part to one side.

 

Vehicles with Front Fog Lamps

22
IMG-413133
 

Disconnect the connector for the fog lamp.

23
IMG-413051
 

Remove the screws.

Remove the marked part.

24
IMG-413060
 

Release the catches.

Remove the marked part.

 

All vehicles

25
IMG-413105
 

Release the catches.

26
IMG-413113
 

Remove the marked part.

The part is not to be reused.

27
 

Repeat the steps when removing on opposite side.

 

Accessory installation

28
IMG-417802
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.


Note!
Use a sharp knife.

Locate relevant marking.

  1. Cut the component following the instructions in the graphic.

  2. Use a drill with the stated size

29
IMG-417880
 

Install component that comes with the accessory kit.

Ensure that all clips engage.

30
IMG-417883
 

Install component that comes with the accessory kit.

Ensure that all clips engage.

31
IMG-417891
 

Install component that comes with the accessory kit.

 

Vehicles without parking assistance

32
IMG-417904
 

Install component that comes with the accessory kit.

33
 

Repeat the steps when installing accessories on opposite side.

 

Installation

34
 

Reinstall the removed parts in reverse order.

35
IMG-405228
 

Note!
Make sure to follow the sequence indicated.

Reinstall the removed part.


Tightening torque: Aluminum wheel rim to wheel hub
Stage 1: 4 Nm
Stage 2: 50 Nm
Stage 3: 140 Nm

On both sides.