Bicycle holder with hoist - V70 2007 R AWD

INTRODUCTION

Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available before starting installation.
Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

B8900717

B8900718

B8900719

Illustration A

Position the front-rear strut (1) as illustrated
Secure the strut on the bracket for the lever (2). Use the short Allen screws from the kit. Tighten crosswise. Tighten to 9-11 Nm (6.5-8 lbf.ft.).

Illustration B

Fold the lever back into place by pressing the red plate (3).

Note!
If the lever does not release with the red plate, the lever will spring back under considerable tension.

B8900720

Slide the extensions (1) into the front-rear strut. Lock into place using the screw (2).

B8900721

Warning!

Hold the front-rear strut (1) as illustrated to avoid trapping fingers.

B8903127

Install the wheel holders (1) by twisting them. One wheel holder must be on the extension (2) and one on the strut (3).

Note!
Only one wheel holder may be positioned on the extension.
Position the short straps (4).

A8903126

Installation Instructions