Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 Cross Country 2018
V60 Cross Country (-18) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314358521.132204201, 32204202, 31470154
Parking assistance, camera, rear (without variant code 2G04, without BLIS and without Keyless)




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46

 

981 4088 Puller

Tool number:981 4088

Tool description:Puller

Tool boards:80

 

999 7390 Key

Tool number:999 7390

Tool description:Key

Tool boards:80

 

951 2932 Tension spring

Tool number:951 2932

Tool description:Tension spring

Tool boards:80


Materials

Designation

Part number

Electrical tape


Equipment
IMG-242205
IMG-345497
IMG-239664
IMG-239667

IMG-406433


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 
  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

4
IMG-332193
 
5
IMG-292804
 

Remove the panel.

6
IMG-292806
 

Fold the carpet aside.

7
IMG-292823
 

Unhook the cable harness clips.

Disconnect the connector.

8
IMG-292826
 

Remove the panel.

9
IMG-292827
 

Disconnect the connector, if applicable.

10
IMG-345113
 
11
IMG-340984
 

Disconnect the connector.

12
IMG-340985
 

Remove the screws.

13
IMG-355818
 

Remove the screws.

 

Cars with automatic transmissions

14
IMG-293006
 

Remove the marked part.

15
IMG-293007
 

Release the shift-lock function.

 

All vehicles

16
IMG-340981
 
17
IMG-345292
 
18
IMG-340604
 

Disconnect the connector.

19
IMG-340605
 

Remove the screws.

20
IMG-340607
 

Remove the marked part.

21
IMG-380815
 

Remove the marked part.

 

Accessory installation

22
IMG-399720
 
 

Installation

23
IMG-400531
 

Reinstall the removed part.

24
IMG-340605
 

Reinstall the screws.

 

Removal

 

Vehicles with Sensus Connect

25
IMG-341780
 
26
IMG-341781
 

Remove the marked part.

27
IMG-406135
 
28
IMG-406136
 
29
IMG-340988
 

Remove the screws.

30
IMG-340989
 
31
IMG-380933
 

Note!
The number of connectors may vary depending on the vehicle's equipment level.

Disconnect the connectors.

32
IMG-399566
 

Disconnect the connector, if applicable.

33
IMG-399598
 

The connector is not to be used.

Attach the connector to the wiring harness.

Use: , Electrical tape

 

Vehicles without Sensus Connect

34
IMG-360002
 

Note!
The graphic shows the back of the component before removal.

35
IMG-345114
 

Carefully pry loose the bottom edge of the panel and then continue around the panel.

36
IMG-360001
 
37
IMG-345115
 
38
IMG-340008
 

Remove the screws.

Remove the marked part.

39
IMG-352166
 

Disconnect the connector.

40
IMG-399598
 

The connector is not to be used.

Attach the connector to the wiring harness.

Use: , Electrical tape

41
IMG-346175
 

Note!
The number of connectors may vary depending on the vehicle's equipment level.

Disconnect the connectors.

 

All vehicles

42
IMG-344926
 

Remove the panel.

Disconnect the connector, if applicable.

43
IMG-355782
 

Remove the screws.

Detach the panel.

44
IMG-355781
 

Disconnect the connector.

Remove the panel.

45
IMG-375258
 

Remove the screws.

46
IMG-378228
 

Remove the screws.

Note the position.

47
IMG-378229
 
48
IMG-356889
 

Disconnect the connector.

49
IMG-375053
 

Unhook the cable harness clips.

50
IMG-378229
 

Remove the marked part.

51
IMG-339918
 

Remove the panel.

52
IMG-340032
 

Remove the screw.

Remove the marked part.

53
IMG-340033
 

Remove the weatherstrip.

54
IMG-340034
 

Detach the panel.

55
IMG-340036
 

Caution!
The front and upper sill panel must be removed and installed as one unit.

56
IMG-346682
 
57
IMG-399651
 

Repeat on the other side.

58
IMG-341902
 

Disconnect the connector, if applicable.

Repeat on the other side.

59
IMG-399653
 
60
IMG-391515
 
61
IMG-391502
 
62
IMG-391505
 
63
IMG-391532
 
64
IMG-400970
 

Remove the panel.

65
IMG-343676
 

Remove the panel.

66
IMG-391650
 

Remove the screw.

67
IMG-343678
 

Remove the screw.

Remove the panel.

68
IMG-376371
 

Remove the weatherstrips.

69
IMG-376375
 
70
IMG-376377
 

Remove the panel.

71
IMG-376380
 

Remove the screws.

72
IMG-376382
 

Remove the panel.

73
IMG-400535
 

Remove the panel.

74
IMG-351651
 
75
IMG-391570
 
76
IMG-343413
 
77
IMG-343420
 

Remove the panel.

Check that the fasteners are undamaged before installation. If not, they must be replaced with new ones.

78
IMG-343679
 

Remove the panel.

79
IMG-343422
 

Remove the screws.

80
IMG-391847
 

Remove the panel.

Check that the fasteners are undamaged before installation. If not, they must be replaced with new ones.

81
IMG-391863
 

Remove the screw.

82
IMG-391876
 

Detach the panel.

83
IMG-343681
 
84
IMG-343682
 


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

85
IMG-390812
 

Remove the screws.

86
IMG-343683
 

Remove the panel.

Disconnect the connector, if applicable.

87
IMG-400772
 

Loosen the clips.

Fold the insulation aside.

88
IMG-344481
 
89
IMG-344483
 


Use special tool: T9814088, Puller

90
IMG-344484
 

Remove the screws.

91
IMG-344487
 

Disconnect the connector.

92
IMG-344488
 

Remove the marked part.

93
IMG-344489
 

Remove the panel.

94
IMG-344490
 

Remove the panel.

Repeat on the other side.

95
IMG-352241
 

Note!
Orientation view

96
IMG-352242
 


Use special tool: T9997390, Key

97
IMG-352243
 
98
IMG-352244
 
99
IMG-352246
 

Remove the panel.

100
IMG-400630
 

Disconnect the connectors.

101
IMG-400633
 

Remove the screws.

Remove the marked part.

102
IMG-400634
 

Remove the nuts.

103
IMG-400660
 

Release the catches.

104
IMG-344499
 

Release the catches.

105
IMG-344498
 

Remove the marked part.

 

Accessory installation

106
IMG-400618
 
107
IMG-400665
 
108
IMG-400671
 
109
IMG-344518
 
110
IMG-400660
 

Ensure that all clips engage.

111
IMG-344532
 

Install the nuts


Tightening torque: Exterior handle to tailgate/luggage compartment lid , 3 Nm

112
IMG-400672
 

Reinstall the removed part.

Reinstall the screws.

113
IMG-400673
 

Connect the connectors.

114
IMG-400676
 

Remove the part carefully

115
IMG-382372
 


Use special tool: T9512932, Tension spring

116
IMG-399925
 

Install the cable.

Use: , Electrical tape

117
IMG-400677
 

Pull the wiring through.

118
IMG-400690
 

Pull the wiring through.

119
IMG-400712
 

Pull the wiring through.

Remove the Special Tool.

120
IMG-401046
 
121
IMG-399835
 

Connect the cable harness terminals in the connector as follows.

122
IMG-401095
 

Depress the secondary lock.

123
IMG-400721
 

Connect the connector.

124
IMG-400725
 

Install the cable.

Use a cable tie

125
IMG-400731
 

Adjust the position of the wiring.

Install the cable.

Use a cable tie

126
IMG-400735
 

Adjust the position of the wiring.

Install the cable.

Use a cable tie

127
IMG-400764
 

Reinstall the removed part.

128
IMG-400781
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

129
IMG-400783
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

130
IMG-400855
 

Position/route the cable as illustrated.

131
IMG-400857
 

Fold the insulation aside.

132
IMG-400858
 

Position/route the cable as illustrated.

Pull the wiring through.

133
IMG-400859
 

Fold the insulation aside.

134
IMG-400860
 

Position/route the cable as illustrated.

135
IMG-400870
 

Position/route the cable as illustrated.

136
IMG-400890
 

Position/route the cable as illustrated.

137
IMG-405992
 

Position/route the cable as illustrated.

138
IMG-406125
 
139
IMG-406126
 
140
IMG-406127
 
141
IMG-406128
 
142
IMG-406175
 
 

Vehicles with Sensus Connect

143
IMG-406222
 

Position/route the cable harness as illustrated.

 

Vehicles without Sensus Connect

144
IMG-406224
 

Position/route the cable harness as illustrated.

145
IMG-348748
 

Note!
The number of connectors may vary depending on the vehicle's equipment level.

Connect the connectors.

146
IMG-352266
 

Connect the prerouted cable.

147
IMG-400898
 

Reinstall the removed part.

Reinstall the screws.

 

All vehicles

148
IMG-400932
 

Position/route the cable as illustrated.

149
IMG-400934
 

Position/route the cable as illustrated.

150
IMG-400933
 

Note!
Orientation view

151
IMG-400319
 
  1. Depress the locking device.

  2. Release the connector's catch.

  3. Disconnect the connector.

152
IMG-387423
 

Release the catches.

Remove the marked part.

153
IMG-400415
 

Release the connector's secondary lock.

Lift approximately 2 mm.

154
IMG-400381
 
155
IMG-399604
 

Connect the cable harness terminals in the connector as follows.

156
IMG-400383
 

Depress the secondary lock.

157
IMG-387424
 

Reinstall the removed part.

158
IMG-400420
 

Connect the connector.

159
IMG-400935
 

Install the cable.

Use a cable tie

160
IMG-400320
 
161
IMG-381922
 
 

Vehicles with Sensus Connect

162
IMG-384899
 

Connect the prerouted cable.

163
IMG-380943
 

Note!
The number of connectors, cables and cable ties can vary depending on the vehicle's equipment level.

Connect the connectors.

164
IMG-400897
 

Reinstall the removed part.

Reinstall the screws.

 

All vehicles

165
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

166
IMG-400005
 

Calibrate according to: DIAGNOSTICS/VEHICLE COMMUNICATION/Advanced/PAC/Service calibration, parking camera