Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

7. Used for accessory components.

Removal

Remove the panel.

Disconnect the connector.

Remove the panel.

Remove the panel.

Disconnect the connector, if applicable.

Remove the panel.

Remove the marked part.

Fold the carpet aside.

Remove the cable harness clips.

Remove the screw.

Loosen the component indicated. Do not remove it.

Fold the insulation aside.

Remove the marked part.

Remove any traces of glue.

Accessory installation

Install component that comes with the accessory kit.

Refit the insulation.

Make a cut in the insulation.

Fold the insulation aside.

Place the component where indicated in the graphic.

Tighten the screw.

Tightening torque: Child seat mounting eyelet, outer , 7 Nm

Removal

Fold the carpet aside.

Remove the screw.

The item is not to be reused.

Accessory installation

Install component that comes with the accessory kit.

Tighten the screw.

Tightening torque: Child seat mounting eyelet, inner , 13 Nm

Installation

Reinstall the removed parts in reverse order.