Decor trim, air intake, chrome - V70 2010 - Volvo Cars Accessories

2010 L.H.D

V70 Cars

Installation Instruction

Installation instructions, accessories

Volvo Car Corporation Gothenburg, Sweden

V70 2010

V70 (08-) 2010

Instruction No		Version		Part. No.
31339982		1.0		31339983

Decor trim, air intake, chrome

IMG-359456

Materials
Designation	Part number
soap solution
Isopropanol	1161721

Equipment

IMG-345497

IMG-239660

IMG-239681

IMG-239980

IMG-239943

IMG-239981

IMG-332314

IMG-333293

IMG-337037

Information

1

Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available before starting installation.
Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Conditions

2

IMG-359602

Clean the surface.

Use: , soap solution

Wipe dry.

Accessory installation

3

IMG-359466

4

IMG-359471

Use suitable tape to indicate the center.

5

IMG-359522

Caution!
Use suitable tape to protect the components.

Removal

6

IMG-359463

Remove the screw.

Repeat on the other side.

7

IMG-359516

Remove the screws.

8

IMG-239481

Unhook the clip(s).

9

IMG-359518

Remove the panel.

Vehicles with parking assistance

10

IMG-359635

Loosen the wiring harness or move it to the side.

Repeat on the other side.

Accessory installation

11

IMG-359538

Measure and mark as illustrated.

12

IMG-359539

Use suitable tape to indicate the center.

Removal

13

IMG-359528

Caution!
Cut carefully to avoid unintentional damage or personal injury.

Installation

14

IMG-359575

15

IMG-359587

Request the aid of a colleague for this procedure.

Hold the component in the position shown.

Scribe/mark up

Repeat on the other side.

16

IMG-359589

Caution!
Make sure not to damage wiring, hoses or other components.

Drill the holes.

Remove the swarf.

Removal

17

IMG-359601

Remove the tape.

18

IMG-359469

Clean the surface.

Use: 1161721, Isopropanol

19

IMG-337559

Remove the protective film.

Repeat on the other side.

20

IMG-359621

Partly fold back the transparent foil to expose the sticky surface.

Accessory installation

21

IMG-359607

Note!
Make sure that the mating faces are at a minimum temperature of 20°C.

22

IMG-359627

Caution!
Make sure that equal pressure is applied to the full length of the component.

Remove the protective film.

After installation, the car must not be washed for 48 hours

23

IMG-359628

Install the clips as illustrated.

24

Reinstall the removed parts in reverse order.