Op. No.: 89204 89208
A towbar with a unique design for V70 and V70 R, easy to install when it's needed. When it's not needed, it's easily removed and all that can be seen is the fully covering protective plug. The car is fully prepared with weld nuts in the body and a clear marking for cut-out in the bumper casing.
|31269522||High towbar (for cars without level control)||Installation Instruction|
|31269522||V70 R, High towbar (for cars without level control)||Installation Instruction|
High towbar is recommended for the V70 R.
|306642125||W0235-, Only for 140 hp / 170 hp|
You can also benefit from purchasing the Volvo design of protective cover that neatly and efficiently conceals the mounting for the detachable towball. The protective cover also protects clothes from dirt.
Protective cover, see .
Facts and advantages
Thoroughly tested both in the laboratory and on the test track to fulfill Volvo's strict requirements for quality and durability
Surface treated in several stages for the best corrosion resistance
It is supplied complete with all the required bolts, nuts, an electrical bracket and the installation instructions
The safety cable anchorage is clearly located and easily accessible
The ball section is easy to remove when the towbar is not in use
The ball section has protection against theft with a lock
Cars equipped with four C must use towbars designed for cars with level control
AWD does not make a difference when selecting part numbers
Approved according to EU directive 94/20/EC
21.6 kg (48 lbs)
Max. towing capacity:
1800 kg (4000 lbs)
Max. ball pressure:
85 kg (190 lbs)
The towbar is tested for the maximum towing weight and ball pressure, but this can be lower depending on the car version. For precise information, check car version and refer to the car's owner's manual.
The fixed towbar is recommended for the V70 Bi-Fuel, as collision-safe storage of the detachable towbar's towball cannot be guaranteed.