Workshop installation recommended
Excl. AU, MX, BR, CA, US, PR
Op. No.: 89208
With the electrically folding towbar you do not have to stretch beneath the car to detach or remove the towbar. Pressing a button in the luggage compartment fold the towbar out. A simple hand movement positions the towbar in a locked position.
For increased safety there is a light indicator on the button that indicates that the towbar is locked. If the towbar is unlocked a warning message is shown in the car's combined instrument panel.
The trailer module manages the electronic communication between the vehicle and trailer.
With the help of the light control function in the car's display, the lamps on the trailer illuminate in a sequence which makes it easier to check the lighting.
If, when driving, there is a fault or problem with the trailer's direction indicators or brake lights, the trailer module immediately sends the driver information.
For complete towbar installation, the Trailer Stability Assist (TSA) function is activated. The task of Trailer Stability Assist (TSA) is to stabilise a car with a connected trailer in situations where the car/trailer combination starts to snake. The function is part of the ESC stability system.1
Trailer Stability Assist (TSA) constantly monitors the car's movements, especially laterally. If snaking is detected, individual wheel braking is applied, which provides a stabilising effect on the car/trailer combination. This is usually enough for the driver to regain control of the car.
The towbar is equipped with the "Fix4Bike" system. It allows the installation of future accessories specially prepared for "Fix4Bike".
Each Volvo towbar has been designed for your Volvo. They are an integral part of the car's body and have been tested to ensure that they meet the most stringent safety and function demands.
|32296489||Including electrical cable kit with 13-pin connection||Installation Instruction|
|31399328||For cars without electric seat lowering|
|31453060||For cars with electric seat lowering|
Facts and advantages
Thoroughly tested both in the laboratory and on the test track to fulfill Volvo's strict requirements for quality and durability.
Approved according to EU directive ECE R55.
Surface treated in several stages for the best corrosion resistance.
The towbar's ball neck is made of steel with a zinc-nickel coating.
The mounting for the safety wire is integrated in the towbar's ball neck, and thus easily accessible.
The electrical socket is integrated in the towbar's ball neck.
The trailer module is compatible with trailers with LED lighting.
Control function of the trailer lighting, which makes it possible for the driver to check the trailer lighting, even when alone.
The towbar is supplied complete with certification sheet and is ready to install.
The towball protection can remain fitted and protect the towball when the towbar is retracted. Ordered separately.
26.8 kg (59 lbs)
Max. towing capacity:
Max. ball pressure:
100 kg (220 lbs)
The towbar is tested for the maximum towing weight and towball load, but depending on the car version, it may be lower. For precise information, see the car's owner's manual or contact your local Volvo dealer.
- The function is included with towbar installation, contact your local Volvo dealer for more information. When retrofitting the towbar, an update of the car's software is required, contact your local Volvo dealer for more information.
- Ordered according to separate procedures and downloaded using VIDA.
- Contact your local Volvo dealer for precise details about maximum towing weight for your car.