| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | There may be parts in the accessories kit that are not needed for this installation. |
| | |
|  | | IMG-363036 |
|
| | Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
|  | | IMG-394535 |
|
| | |
| | |
| | Note!
The removal steps may contain installation details. |
|
|  | | IMG-383769 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-412247 |
|
| | Note!
Perform the procedure one side at a time. |
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
Disconnect the connector. |
|  | | IMG-414590 |
|
| | |
|  | | IMG-412242 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
|  | | IMG-414575 |
|
| | |
|  | | IMG-414580 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
|  | | IMG-414585 |
|
| | Remove the screws. Remove the panel. |
|  | | IMG-422101 |
|
| | |
|  | | IMG-414613 |
|
| | |
|  | | IMG-414614 |
|
| | |
|  | | IMG-414995 |
|
| | |
|  | | IMG-415046 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-415047 |
|
| | Remove the panel. Use hands only. |
|  | | IMG-415049 |
|
| | Release the catch. Remove the marked part. |
|  | | IMG-418522 |
|
| | Remove the panel. Use hands only. |
|  | | IMG-418525 |
|
| | Remove the screw.
Tightening torque: M6
, 10 Nm
|
|  | | IMG-414411 |
|
| | Release the lock. Repeat on the other side. Remove the marked part. |
|  | | IMG-414483 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
|  | | IMG-422120 |
|
| | Caution!
Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor! |
|
| | | IMG-422101 |
|
| | |
|  | | IMG-414520 |
|
| | |
|  | | IMG-397280 |
|
| | |
|  | | IMG-397244 |
|
| | |
|  | | IMG-397247 |
|
| | |
|  | | IMG-383130 |
|
| | Remove the screws.
Tightening torque: Front seat to body
, 40 Nm
|
|  | | IMG-414525 |
|
| | |
|  | | IMG-414515 |
|
| | Remove the screws.
Tightening torque: Front seat to body
, 40 Nm
|
|  | | IMG-383134 |
|
| | |
|  | | IMG-396605 |
|
| | Disconnect the connector. |
|  | | IMG-396606 |
|
| | Unhook the cable harness clips. |
|  | | IMG-414526 |
|
| | |
|  | | IMG-416201 |
|
| | Remove the screws. Fold marked part aside. |
|  | | IMG-415092 |
|
| | |
| | Right-hand drive vehicles |
|  | | IMG-394096 |
|
| | Remove the marked part. The part is to be reused. |
|  | | IMG-394081 |
|
| | Remove the screw. The part is to be reused. |
|  | | IMG-394105 |
|
| | |
|  | | IMG-394078 |
|
| | Disconnect the connector. |
|  | | IMG-426665 |
|
| | |
| | |
|  | | IMG-407110 |
|
| | |
|  | | IMG-414611 |
|
| | |
|  | | IMG-415830 |
|
| | Repeat on the other side. |
|  | | IMG-415831 |
|
| | Remove the screw.
Tightening torque: M6
, 10 Nm
Repeat on the other side. |
|  | | IMG-416086 |
|
| | |
|  | | IMG-416087 |
|
| | |
| | Vehicles with keyless entry |
|  | | IMG-413321 |
|
| | |
| | |
|  | | IMG-415835 |
|
| | |
|  | | IMG-416089 |
|
| | |
|  | | IMG-418545 |
|
| | Disconnect the connectors. Remove the panel. |
|  | | IMG-418696 |
|
| | |
|  | | IMG-418703 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-418710 |
|
| | |
|  | | IMG-418626 |
|
| | |
|  | | IMG-418631 |
|
| | |
|  | | IMG-418634 |
|
| | Remove the screws. Remove the panel. |
|  | | IMG-418641 |
|
| | Disconnect the connector. |
|  | | IMG-418643 |
|
| | Loosen the screws. Loosen the exact number of turns indicated in the image. |
|  | | IMG-418645 |
|
| | Use: Interior trim remover
The part is not to be reused. |
| | |
|  | | IMG-426635 |
|
| | |
|  | | IMG-426636 |
|
| | |
|  | | IMG-418648 |
|
| | Tighten the bolts.
Use special tool: T9814199, Torque wrench
|
|  | | IMG-418642 |
|
| | |
|  | | IMG-418825 |
|
| | Loosen the marked detail/details. To be repeated in the other end of the component. |
|  | | IMG-418831 |
|
| | Release the catches. Loosen the marked detail/details. Use: Scribe
Use: Interior trim remover
To be repeated in the other end of the component. |
|  | | IMG-419675 |
|
| | Use: 988734, Cable tie, 750 mm
|
|  | | IMG-419680 |
|
| | |
|  | | IMG-426796 |
|
| | |
|  | | IMG-426795 |
|
| | |
|  | | IMG-426797 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-419805 |
|
| | Pull the wiring through. Use: 1161150, Lubricant
Wipe off Remove the cable tie(s). |
|  | | IMG-419818 |
|
| | |
|  | | IMG-418850 |
|
| | Reinstall the removed part. To be repeated in the other end of the component. |
|  | | IMG-418841 |
|
| | Caution!
Make sure that the rubber grommet seals properly to the body. |
Reinstall the removed part. To be repeated in the other end of the component. |
|  | | IMG-426599 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
|  | | IMG-426597 |
|
| | Route the wires adjacent to existing wirings. Install the cables. Use a cable tie |
|  | | IMG-427770 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-415163 |
|
| | Connect the prerouted cable. |
|  | | IMG-426643 |
|
| | Route the wire adjacent to existing wirings. |
| | Right-hand drive vehicles |
|  | | IMG-427805 |
|
| | |
| | |
|  | | IMG-426646 |
|
| | Install the cable. Use a cable tie |
|  | | IMG-416389 |
|
| | |
|  | | IMG-426585 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-426588 |
|
| | Note!
Route the wiring between floor carpet and air duct. |
Position/route the cables as illustrated. Use tape |
|  | | IMG-426590 |
|
| | Position/route the cables as illustrated. |
|  | | IMG-426595 |
|
| | Route the wires adjacent to existing wirings. Install the cables. Use a cable tie |
|  | | IMG-426648 |
|
| | Route the wires adjacent to existing wirings. Install the cables. Use a cable tie |
|  | | IMG-426631 |
|
| | Position the cable harness excess as illustrated. Use a cable tie |
| | Applies to model V90 manufactured between chassis number 050777-084084. Applies to model V90CC manufactured between chassis number 026819-066036. |
| | Note!
Make sure that the vehicle has the latest software status |
|
| | |
|  | | IMG-242268 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number. |
| | |
|  | | IMG-400000 |
|
| | Reinstall the removed parts in reverse order. |
