Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC70 2013
XC70 (08-) 2013

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313596151.431359616
Towbar detachable




 

Special tools

 

999 7338 Extension rod

Tool number:999 7338

Tool description:Extension rod

Tool boards:80


Materials

Designation

Part number

Rust inhibitor, low viscosity


Equipment
IMG-345497
IMG-239664
IMG-239660
IMG-240693
IMG-256903
IMG-282923
IMG-282924

IMG-378172

IMG-378039


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-259752
 
4
IMG-259753
 

Remove the nuts.

5
IMG-259755
 

Remove the screws.

6
IMG-259754
 

Remove the screws.

7
IMG-379389
 

Repeat on the other side.

8
IMG-379404
 

Caution!
Push the bumper casing down when removing, so as not to damage the rear lights.


Note!
This step is easier with two people.

Repeat on the other side.

9
IMG-379386
 

Note!
This step is easier with two people.

Release the connector's catch.

Disconnect the connector.

10
IMG-379405
 

Caution!
Place the Bumper Cover on a suitable surface.


Note!
This step is easier with two people.

11
IMG-261414
 
12
IMG-259759
 

Remove the screws.

13
IMG-259760
 
14
IMG-259761
 

Remove the screws.

On both sides.

15
IMG-377019
 

Remove the panel.

16
IMG-377020
 

Caution!
Take extra care not to damage the wiring harnesses.

Remove the screw.

17
IMG-259763
 
 

Accessory installation

 

Vehicles without spare wheel

18
IMG-260410
 

Caution!
Make sure not to damage wiring, hoses or other components.

Measure and mark as illustrated.

Deburr the hole edges.

19
IMG-378041
 

Install the screw.

Install the nut.

20
IMG-378042
 
 

Removal

 

Vehicles with double Exhaust End Pipes and AWD

21
IMG-378179
 

Note!
Orientation view

22
IMG-378176
 
23
IMG-260846
 
 

Vehicles with Double Exhaust End Pipes and 2WD

24
IMG-378201
 
25
IMG-378200
 
 

All vehicles

26
IMG-259825
 

Remove the screws.

27
IMG-378203
 

Note!
This step is easier with two people.

28
IMG-260849
 

Remove the clips.

29
IMG-378129
 
30
IMG-364281
 

Measure and mark as illustrated.

Remove the tape.

Repeat on the other side.

31
IMG-260852
 

Caution!
Make sure that the surface is clean and free of foreign material.

Clean the surface.

Repeat on the other side.

 

Accessory installation

32
IMG-378204
 
33
IMG-378464
 

Note!
Note the position.

Repeat on the other side.

34
IMG-378465
 

Note!
This step is easier with two people.


Note!
Only tighten the bolts finger tight at this stage.

Install the screws.

Repeat on the other side.

35
IMG-378466
 

Repeat on the other side.

36
IMG-378467
 

Repeat on the other side.

 

Installation

37
IMG-378136
 
38
IMG-261083
 

Install the clip(s).

39
IMG-378220
 
40
IMG-282946
 

Measure and mark as illustrated.

41
IMG-378212
 

Note!
This step is easier with two people.

42
IMG-282963
 

Install the screws.


Tightening torque: M10 , 50 Nm

 

Vehicles with double Exhaust End Pipes and AWD

43
IMG-260865
 
 

All vehicles

44
IMG-378218
 

Warning!
Make sure that there are no leaks.


Note!
Ensure that the exhaust clamp cannot come into contact with surrounding parts during operation.

 

Vehicles with Single Exhaust End Pipe and AWD

 

Removal

45
IMG-259824
 
46
IMG-259827
 

Remove the screw.

47
IMG-260867
 

Remove the clips.

48
IMG-260868
 

Note!
Always use new seals, screws and nuts.

Remove the nuts.

49
IMG-260869
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.

50
IMG-260870
 
51
IMG-260871
 
52
IMG-364281
 

Measure and mark as illustrated.

Remove the tape.

Repeat on the other side.

53
IMG-260852
 

Caution!
Make sure that the surface is clean and free of foreign material.

Clean the surface.

Repeat on the other side.

 

Accessory installation

54
IMG-378204
 
55
IMG-378464
 

Note!
Note the position.

Repeat on the other side.

56
IMG-378465
 

Note!
This step is easier with two people.


Note!
Only tighten the bolts finger tight at this stage.

Install the screws.

Repeat on the other side.

57
IMG-378466
 

Repeat on the other side.

58
IMG-378468
 

Repeat on the other side.


Use special tool: T9997338, Extension rod

 

Installation

59
IMG-260923
 
60
IMG-260867
 

Install the clip(s).

61
IMG-378222
 

Note!
Always use new seals, screws and nuts.

Install the nuts

62
IMG-259871
 

Install the screw.


Tightening torque: M10 , 50 Nm

63
IMG-259873
 
 

Vehicles with Single Exhaust End Pipe and 2WD

 

Removal

64
IMG-259823
 
65
IMG-259827
 

Remove the screw.

 

Vehicles with 4 cyl diesel engine

66
IMG-259836
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Always use new seals, screws and nuts.

Remove the nuts.

 

Vehicles with 4-cyl gasoline engine

67
IMG-259837
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Always use new seals, screws and nuts.

Remove the nuts.

 

Vehicles with 5-cyl diesel engine

68
IMG-259838
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.

Remove the nuts.

Always use new seals, screws and nuts.

69
IMG-259829
 

Remove the clips.

70
IMG-260925
 
71
IMG-364281
 

Measure and mark as illustrated.

Remove the tape.

Repeat on the other side.

72
IMG-260852
 

Caution!
Make sure that the surface is clean and free of foreign material.

Clean the surface.

Repeat on the other side.

 

Accessory installation

73
IMG-378204
 
74
IMG-378464
 

Note!
Note the position.

Repeat on the other side.

75
IMG-378465
 

Note!
This step is easier with two people.


Note!
Only tighten the bolts finger tight at this stage.

Install the screws.

Repeat on the other side.

76
IMG-378466
 

Repeat on the other side.

77
IMG-378468
 

Repeat on the other side.


Use special tool: T9997338, Extension rod

 

Installation

78
IMG-260929
 
79
IMG-259865
 

Install the clip(s).

 

Vehicles with 4 cyl diesel engine

80
IMG-378224
 

Note!
Always use new seals, screws and nuts.

Install the nuts

 

Vehicles with 4-cyl gasoline engine

81
IMG-378225
 

Note!
Always use new seals, screws and nuts.

Install the nuts

 

Vehicles with 5-cyl diesel engine

82
IMG-378222
 

Note!
Always use new seals, screws and nuts.

Install the nuts

83
IMG-259871
 

Install the screw.


Tightening torque: M10 , 50 Nm

84
IMG-259874
 
 

All vehicles

85
IMG-259875
 

Use: , Rust inhibitor, low viscosity

Repeat on the other side.

86
IMG-259876
 

Install the screws.

Repeat on the other side.

87
IMG-282983
 

Caution!
Take extra care not to damage the wiring harnesses.

Install the screw.

88
IMG-364322
 

Install the panel.

89
IMG-260746
 

Install the panel.

90
IMG-259881
 

Reinstall the screws.

 

Accessory installation

91
IMG-378262
 

Remove the screws.

92
IMG-377452
 
93
IMG-378488
 
94
IMG-378238
 

Locate relevant marking.

95
IMG-378239
 
96
IMG-378241
 

Deburr edges

97
IMG-378524
 

Locate relevant marking.

98
IMG-378523
 

Apply tape to the other side, opposite the marking lines.

99
IMG-378522
 
100
IMG-378525
 

Deburr edges

101
IMG-377070
 

Install tow bar connector and wiring harness according to installation instruction: Towbar, Wiring and Control Unit.

Reinstall the removed parts in reverse order.

 

Vehicles without spare wheel

102
IMG-378068
 
103
IMG-226145
 
104
IMG-226147
 
 

Vehicles with spare wheel

105
IMG-378068
 
106
IMG-226148
 
107
IMG-226150
 
 

All vehicles

108
IMG-260445
 

Take the label from the kit and attach it to the underneath of the cargo compartment mat as illustrated.

Attach the four corners of the label using staples.

109
IMG-261415
 
110
IMG-226909
 
111
IMG-227105
 
 

Removal

112
IMG-260447