Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2014
XC60 (-17) 2014 L.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313990961.131339994
Parking assistance camera wide angle front




IMG-374543




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46

 

999 7482 Cutting tool

Tool number:999 7482

Tool description:Cutting tool

Tool boards:30


Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-242205
A0000162
IMG-239664
IMG-300203
IMG-327738
IMG-239667

IMG-374538


 
  
36686

Parking assistance, camera, wide angle front

Equipment

Designation

Scribe

Expander pliers

Angle drill machine


 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
IMG-332179
 

Set the ignition key to position 0.

Remove the battery's negative cable.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-345728
 

Remove the panel.

5
IMG-345734
 

Disconnect the connector.

6
IMG-345736
 

Release the catches.

7
IMG-345737
 

Remove the panel.

8
IMG-345744
 

Remove the screws.

9
IMG-345745
 

Remove the screws.

10
IMG-340598
 

Remove the panel.

11
IMG-345746
 

Remove the panel.

12
IMG-340599
 
  1. Fold the carpet to the side.

  2. Remove the cable harness clips.

  3. Disconnect the connector.

13
IMG-340600
 

Remove the panel.

 

Vehicles with the 4C system.

14
IMG-340601
 

Disconnect the connector.

 

All vehicles

15
IMG-340602
 

Use tape

16
IMG-375923
 
17
IMG-293010
 
18
IMG-375925
 
19
IMG-345767
 

Remove the screws.

20
IMG-345766
 
21
IMG-345769
 

Disconnect the connectors.

22
IMG-341780
 
23
IMG-341781
 
24
IMG-341782
 

Remove the screws.


Tightening torque: M8 , 24 Nm

25
IMG-341773
 
26
IMG-374438
 

Remove the screws.

27
IMG-374497
 

Detach the panel.

28
IMG-346026
 


Tightening torque: M8 , 24 Nm

29
IMG-341771
 


Tightening torque: M8 , 24 Nm

30
IMG-341746
 


Tightening torque: M8 , 24 Nm

31
IMG-345770
 
32
IMG-346281
 
33
IMG-345774
 

Remove the screws.

34
IMG-345773
 
35
IMG-345776
 

Disconnect the connectors.

36
IMG-374495
 

Disconnect the connector.

37
IMG-374547
 

Install component that comes with the accessory kit.

38
IMG-362040
 

Locate the existing connector in the vehicle's cable harness.

Connect the connector.

39
IMG-374510
 

Tear off the excess foam tape.

Clamp the cables and connectors to the existing cables to prevent noise.

40
IMG-345849
 
41
IMG-345850
 
42
IMG-345851
 
43
IMG-345856
 
44
IMG-345857
 
45
IMG-345858
 
46
IMG-345859
 
47
IMG-307603
 

Locate the rubber grommet under the insulation and press it out.

48
IMG-345860
 

Pull the wiring through.

49
IMG-345861
 

Connect the connectors.

50
IMG-345862
 
51
IMG-345767
 

Reinstall the screws.

52
IMG-345863
 

Connect the connectors.

53
IMG-345864
 
54
IMG-345774
 

Reinstall the screws.

55
 

Reinstall the removed parts in reverse order.

 

Accessory installation

56
IMG-375942
 

Note!
Orientation view

57
IMG-374212
 

Measure and mark as illustrated.

Use: Scribe

58
IMG-374213
 
59
IMG-374224
 


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

60
IMG-374215
 
61
IMG-374217
 
 

Removal

62
IMG-345865
 
63
IMG-345866
 

Use tape

64
IMG-345867
 
65
IMG-345871
 
66
IMG-345872
 
67
IMG-345873
 

Remove the part carefully

68
IMG-345874
 
69
IMG-345875
 
70
IMG-345876
 
71
IMG-307687
 
72
IMG-307688
 
73
IMG-345877
 
  1. Remove the clips.

  2. Remove the screws.

74
IMG-345878
 
75
IMG-345879
 

Locate the rubber grommet under the insulating mat.

76
IMG-345880
 

Pull the wiring through.

77
IMG-345881
 
78
IMG-345882
 

Use: Expander pliers

Use: 1161427, Low temperature grease

79
IMG-345883
 
80
IMG-273585
 
81
IMG-340533
 

Remove the nuts.

82
IMG-340606
 
83
IMG-345884
 
84
IMG-345885
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.


Note!
Do not yet tighten the clamps.

Route the ground wire next to the existing wiring harness.

85
IMG-345886
 
86
IMG-345887
 

Route the cable harness to the existing cable harness.

87
IMG-345888
 
88
IMG-345889
 
89
IMG-345890
 

Caution!
Tighten clamps properly.

90
IMG-347781
 
91
IMG-347786
 
92
IMG-375872
 

Note!
Orientation view


Note!
This step is easier with two people.

93
IMG-375871
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

94
IMG-375843
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

95
IMG-375883
 
96
IMG-347781
 
97
IMG-347786
 
98
IMG-374396
 
99
IMG-374391
 
100
IMG-375891
 

Connect the connector.

101
IMG-375895
 
102
IMG-340544
 

Caution!
Tighten clamps properly.

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

Reinstall the removed parts in reverse order.

103
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31285245