Towbar, detachable Hitch

Towbar, detachable Hitch

CA, CL, MX, PE, PR, US

Op. No.: 89204 89208

A tow hitch for the car, specially developed for the North American market. The ball part is very easy to handle. If you want to remove it, to make room for hitch-mounted accessories, you only need to remove a pin.

The towbar consists of three main components: crossmember, ball holder and a ball with a diameter of 2". The car has provision in the bodywork for installation.

If you choose to not have the ball or any of our accessories installed, a protective cover that covers the hole in the cross member is supplied.

Part. No.Description
313594674/7 pinInstallation Instruction
+ Ball mount 2", Class 2
Part. No.
30754970
+ Ball 2", Class 2
Part. No.
30756689
+ Butt connector for cars with double endpipes
Part. No.Description
3074243209-10, T6 (B6304T2)
3073897608-10, 3.2 (B6324S)
Part. No.Description
3073897608-09, D5 (D5244T4)

Facts and advantages

  • Thoroughly tested both in the laboratory and on the test track to fulfill Volvo's strict requirements for quality and durability

  • Surface treated in several stages for the best corrosion resistance

  • The safety cable anchorage is clearly located and easily accessible

  • The ball section is easy to remove when the towbar is not in use

  • Approved to VESC V-5.

Technical data

Accessory weight:

Member kit:

V70:

28 lbs (12.8 kg)

XC70:

30 lbs (13.8 kg)

Ball holder

6.8 lbs (3.1 kg)

Ball

2.0 lbs (0.9 kg)

Max. towing capacity:

3300 lbs / 1500 kg

Towball diameter:

2" Class 2

Max. ball pressure:

165 lbs / 75 kg

Photo:

VCC_08630

Note!

The towbar is tested for the maximum towing weight and ball pressure, but this can be lower depending on the car version. For precise information, check car version and refer to the car's owner's manual.

Last updated: 4/24/2019