Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 2018
V40 (13-) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314392181.331435603, 31439122, 31363053
Electrical socket, load compartment




IMG-369092




 
Equipment
IMG-345497
IMG-239660
IMG-239681
IMG-282889

IMG-390556


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332193
 

Set the ignition key to position 0.

4
IMG-355927
 
5
IMG-355932
 
6
IMG-372962
 

Note!
The graphic shows the back of the component before removal.

7
IMG-372961
 

Remove the panel.

8
IMG-354413
 
9
IMG-360944
 

Repeat on the other side.

10
IMG-360951
 
11
IMG-366366
 
12
IMG-355946
 

Remove the screws.

13
IMG-356006
 

Remove the panel.

14
IMG-373665
 

Detach the panel.

15
IMG-373664
 

Disconnect the connector, if applicable.

16
IMG-355942
 

Remove the panel.

17
IMG-356008
 

Remove the panel.

18
IMG-356007
 

Remove the panel.

 

Accessory installation

19
IMG-369099
 

Locate relevant marking.

20
IMG-373730
 

Measure and mark out the centre.

21
IMG-373731
 
22
IMG-373732
 
23
IMG-373733
 

Prepare the hole diameter.

24
IMG-391127
 

Install component that comes with the accessory kit.

25
IMG-391146
 
 

Vehicles without tow hitch.

26
IMG-369484
 

Locate and disconnect the 2-pin connector that is taped to the car's cable harness.

27
IMG-391136
 

Install component that comes with the accessory kit.

Connect the connector.

 

Vehicles with towbar

28
IMG-369299
 

Disconnect the connector.

29
IMG-391141
 

Install component that comes with the accessory kit.

Connect the connector.

30
IMG-369308
 

Connect the connector.

 

All vehicles

31
IMG-369493
 

Route the cable harness to the existing cable harness.

Connect the cable.

Install component that comes with the accessory kit.


Tightening torque: M6 , 10 Nm

Install the cable.

32
IMG-369144
 

Note!
Extra cable length must be secured using cable ties.

Connect the connector.

Clamp the cables and connectors to the existing cables to prevent noise.

 

Vehicles without tow hitch.

33
IMG-356526
 
34
IMG-356597
 

Note!
Orientation view

35
IMG-356582
 

Release the locks.

36
IMG-366013
 
37
IMG-401071
 
 

All vehicles

 

Installation

38
IMG-369145
 

Install the panel.

39
 

Reinstall the removed parts in reverse order.