Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

7. Used for accessory components.

Removal

Remove the screws.

Vehicles with Foot movement detection (FMDM)

Loosen the component indicated. Do not remove it.

All vehicles

Alternative 1

Release the catches.

Remove the marked part.

Locate relevant marking.

Use special tool: T1158590, PIPE CUTTER

Loosen the marked detail/details.

The part is not to be reused.

Alternative 2

Locate relevant marking.

Use special tool: T1158590, PIPE CUTTER

Vehicles with actuator, early version

Disconnect the connector.

Unhook the cable harness clips.

Use special tool: T9814187, Clip tool

Remove the nuts.

Remove the marked part.

Release the catches.

Remove the marked part.

Alternative 3

Remove the screws.

Loosen the component indicated. Do not remove it.

Repeat on the other side.

Remove the marked part.

Repeat on the other side.

Accessory installation

Alternatives 1 and 2

Install component that comes with the accessory kit.

Ensure that all clips engage.

Install component that comes with the accessory kit.

Ensure that all clips engage.

Repeat on the other side.

Install the screws.

Repeat on the other side.

Install component that comes with the accessory kit.

Repeat on the other side.

Install the screws.

Repeat on the other side.

Alternative 1

Install component that comes with the accessory kit.

Install component that comes with the accessory kit.

Place the component where indicated in the graphic.

Tighten the nuts.

Tightening torque: M10 , 50 Nm

Alternatives 1 and 2

Install component that comes with the accessory kit.

Repeat on the other side.

Vehicles with actuator, early version

Install the marked component.

Install the nuts

Tightening torque: Actuator, to Exhaust system , 5 Nm

Connect the connector.

All vehicles

Repeat on the other side.

Tightening torque: M10 , 50 Nm

Tighten the nut.

Repeat on the other side.

Alternative 3

Install component that comes with the accessory kit.

Repeat on the other side.

Install the marked component.

Repeat on the other side.

Install the screws.

Repeat on the other side.

Alternatives 1 and 2

Install component that comes with the accessory kit.

Ensure that all clips engage.

All vehicles

Reinstall the screws.